From 758206730a15b5a96200e8dc9437fc4c3e933ea8 Mon Sep 17 00:00:00 2001
From: "OST\\sara.halter" <sara.halter@gmx.ch>
Date: Mon, 27 Sep 2021 16:45:58 +0200
Subject: Variante zur ersten korrektur

---
 doc/projectplan/ProjectPlan.tex | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

(limited to 'doc/projectplan/ProjectPlan.tex')

diff --git a/doc/projectplan/ProjectPlan.tex b/doc/projectplan/ProjectPlan.tex
index 7e91e44..dbcb216 100644
--- a/doc/projectplan/ProjectPlan.tex
+++ b/doc/projectplan/ProjectPlan.tex
@@ -63,7 +63,7 @@
 		\vspace{5mm}
 		{\LARGE Project: \textit{Fading illustration with SDR}} \\
 		\vspace{5mm}
-		{\LARGE \bfseries Version 0.1}
+		{\LARGE \bfseries Version 0.5}
 	\end{flushright}
 \end{titlepage}
 
@@ -193,7 +193,7 @@ The project requirements that must be fulfilled are thus:
 \end{itemize}
 
 \section{Development plan}
-% TODO: flexibil parameters 
+
 The development of the project will be carried out roughly in three phases, of which the first two will start in parallel.
 \begin{enumerate}
 	\item Develop an understanding of fading and how to work with SDR devices.
@@ -205,12 +205,14 @@ The development of the project will be carried out roughly in three phases, of w
 Finding the right software tool, like GNURadio or Matlab, for the Project and learn how the program works. The same with the Hardware, is the \textit{USRP B210} the best option or is there an other SDR, which fits better too our requirements. 
 
 \subsection{Prototype}
-Create the first Prototype line Tx-RX without any effects. Including some simulation on that setup first and then tests and measurements on the Hardware.
+Create the first Prototype line TX-RX without any effects. Including some simulation on that setup first and then tests and measurements on the Hardware. 
+After a successful set up, some possible variable parameters will be included. 
 
 \subsection{Theory of fading channels}
-When the Prototype woks we integrate the fading channel models, including simulate and test them on the Hardware. 
-At the end we do the same with a movable Reviser and compare the differences.
+When the Prototype works the integration of the fading channel models starts, including simulations and tests on the Hardware. 
+At the end comes the same with a movable Reviser. Walking will be used to demonstrate that on a scenario. If there will be some time left also with the help of a car.
 
+\newpage
 \section{Milestones}
 
 \begin{table}[h]
-- 
cgit v1.2.1

