From 2490b24a1ced7372e4462c60802748e426901da1 Mon Sep 17 00:00:00 2001 From: Nao Pross Date: Tue, 8 May 2018 16:21:33 +0200 Subject: Add notes, rename gpio class to gpio_pin and rename led variables --- hal/hwconfig.cpp | 24 ++++++++++++++-- hal/pin.hpp | 10 ++++--- led.cpp | 6 ++-- led.hpp | 8 +++--- main.cpp | 53 +++++++++++++++++++---------------- nbproject/Makefile-default.mk | 6 ++-- nbproject/Makefile-genesis.properties | 14 ++++----- nbproject/Makefile-local-default.mk | 29 ++++++++++--------- nbproject/configurations.xml | 7 +++-- 9 files changed, 93 insertions(+), 64 deletions(-) diff --git a/hal/hwconfig.cpp b/hal/hwconfig.cpp index f443f59..1f4cdff 100644 --- a/hal/hwconfig.cpp +++ b/hal/hwconfig.cpp @@ -24,12 +24,32 @@ void hw::regunlock() void osc::initialize() { hw::regunlock(); - // CF no clock failure; COSC FRCDIV; PLLODIV DIV_256; UFRCEN disabled; PBDIVRDY disabled; SLOCK out of lock; FRCDIV FRC/1; SLPEN Idle on WAIT instruction; NOSC FRCDIV; PLLMULT MUL_24; SOSCEN disabled; PBDIV DIV_8; CLKLOCK unlocked; OSWEN Switch is Complete; SOSCRDY disabled; + // CF no clock failure; + // COSC FRCDIV; + // PLLODIV DIV_256; + // UFRCEN disabled; + // PBDIVRDY disabled; + // SLOCK out of lock; + // FRCDIV FRC/1; + // SLPEN Idle on WAIT instruction; + // NOSC FRCDIV; PLLMULT MUL_24; + // SOSCEN disabled; + // PBDIV DIV_8; + // CLKLOCK unlocked; + // OSWEN Switch is Complete; + // SOSCRDY disabled; OSCCON = 0x381F7700; hw::reglock(); // TUN Center Frequency; OSCTUN = 0x0; - // DIVSWEN disabled; RSLP disabled; ACTIVE Active; ROSEL SYSCLK; OE Not Driven out on REFCLKO pin; SIDL disabled; RODIV 0; ON disabled; + // DIVSWEN disabled; + // RSLP disabled; + // ACTIVE Active; + // ROSEL SYSCLK; + // OE Not Driven out on REFCLKO pin; + // SIDL disabled; + // RODIV 0; + // ON disabled; REFOCON = 0x100; // ROTRIM 0; REFOTRIM = 0x0; diff --git a/hal/pin.hpp b/hal/pin.hpp index ab9d3ad..13e9a52 100644 --- a/hal/pin.hpp +++ b/hal/pin.hpp @@ -8,14 +8,16 @@ #ifndef PIN_HPP #define PIN_HPP +#include + extern "C" { #include } -class gpio +class gpio_pin { public: - virtual ~gpio() {} + virtual ~gpio_pin() {} // digital mode methods virtual void set_mode(unsigned m) = 0; @@ -31,11 +33,11 @@ public: // TODO: analog mode methods protected: - gpio() {} + gpio_pin() {} }; template -class io_pin : public gpio { +class io_pin : public gpio_pin { public: enum class mode : unsigned { INPUT = 1, OUTPUT = 0 }; diff --git a/led.cpp b/led.cpp index 4888d84..7cfcb0f 100644 --- a/led.cpp +++ b/led.cpp @@ -7,7 +7,7 @@ #include "led.hpp" -led::led(gpio *pin, led::color color) : _pin(pin), _color(color) +led::led(gpio_pin *pin, led::color color) : _pin(pin), _color(color) { _pin->set_mode(0); // output } @@ -18,14 +18,14 @@ led::~led() } -void led::pin(gpio *pin) +void led::pin(gpio_pin *pin) { if (pin) { _pin = pin; } } -gpio * led::pin() const +gpio_pin * led::pin() const { return _pin; } diff --git a/led.hpp b/led.hpp index 0e674bb..f266d4b 100644 --- a/led.hpp +++ b/led.hpp @@ -19,11 +19,11 @@ public: RED, GREEN, YELLOW, }; - led(gpio *pin, color color); + led(gpio_pin *pin, color color); virtual ~led(); - void pin(gpio *pin); - gpio * pin() const ; + void pin(gpio_pin *pin); + gpio_pin * pin() const ; void get_color(color color); color set_color() const; @@ -37,7 +37,7 @@ public: private: led() {} - gpio *_pin = nullptr; + gpio_pin *_pin = nullptr; color _color; }; diff --git a/main.cpp b/main.cpp index de37652..4d00772 100644 --- a/main.cpp +++ b/main.cpp @@ -5,6 +5,7 @@ * Created on May 1, 2018, 6:18 PM */ +// Note: there is some debug code in uart.tpp that controls the RGB led // #define DEBUG // basic devices @@ -54,7 +55,7 @@ std::vector split(const std::string& str, const char sep) return v; } -int main(int argc, char** argv) +int main(int argc, char *argv[]) { osc::initialize(); interrupts::initialize(); @@ -69,14 +70,14 @@ int main(int argc, char** argv) io_pin<7> led3_pin(&LATEbits, &TRISEbits, &PORTEbits); // build leds - led led1(static_cast(&led1_pin), led::color::RED); - led led2(static_cast(&led2_pin), led::color::GREEN); - led led3(static_cast(&led3_pin), led::color::YELLOW); + led led_red(static_cast(&led1_pin), led::color::RED); + led led_green(static_cast(&led2_pin), led::color::GREEN); + led led_yellow(static_cast(&led3_pin), led::color::YELLOW); #ifdef DEBUG - led1.set(1); - led2.set(1); - led3.set(1); + led_red.set(1); + led_green.set(1); + led_yellow.set(1); uart::write<1>("started\n\r"); #endif @@ -90,11 +91,15 @@ int main(int argc, char** argv) do { input += uart::read_wait<1>(); + // Note: does not work with teraterm on windows // DEL character if (input.back() == '\x7f') { input.pop_back(); - input.pop_back(); - uart::write<1>("\b \b"); + + if (input.size() > 1) { + input.pop_back(); + uart::write<1>("\b \b"); + } } } while (input.back() != '\r' && input.back() != '\n'); @@ -140,9 +145,9 @@ int main(int argc, char** argv) if (command[0] == "show") { if (command[1] == "led") { if (command[2] == "all") { - uart::print<1>(led1.to_string()); - uart::print<1>(led2.to_string()); - uart::print<1>(led3.to_string()); + uart::print<1>(led_red.to_string()); + uart::print<1>(led_green.to_string()); + uart::print<1>(led_yellow.to_string()); } } } @@ -162,31 +167,31 @@ int main(int argc, char** argv) if (command[1] == "led") { if (command[2] == "red") { if (command[3] == "on") { - led1.set(1); + led_red.set(1); } else if (command[3] == "off") { - led1.set(0); + led_red.set(0); } } else if (command[2] == "green") { if (command[3] == "on") { - led2.set(1); + led_green.set(1); } else if (command[3] == "off") { - led2.set(0); + led_green.set(0); } } else if (command[2] == "yellow") { if (command[3] == "on") { - led3.set(1); + led_yellow.set(1); } else if (command[3] == "off") { - led3.set(0); + led_yellow.set(0); } } else if (command[2] == "all") { if (command[3] == "on") { - led1.set(1); - led2.set(1); - led3.set(1); + led_red.set(1); + led_green.set(1); + led_yellow.set(1); } else if (command[3] == "off") { - led1.set(0); - led2.set(0); - led3.set(0); + led_red.set(0); + led_green.set(0); + led_yellow.set(0); } } } diff --git a/nbproject/Makefile-default.mk b/nbproject/Makefile-default.mk index 3dcd31b..757d817 100644 --- a/nbproject/Makefile-default.mk +++ b/nbproject/Makefile-default.mk @@ -19,7 +19,7 @@ endif endif # Environment -MKDIR=mkdir -p +MKDIR=gnumkdir -p RM=rm -f MV=mv CP=cp @@ -162,7 +162,7 @@ else dist/${CND_CONF}/${IMAGE_TYPE}/LiquidSmoke.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES} nbproject/Makefile-${CND_CONF}.mk @${MKDIR} dist/${CND_CONF}/${IMAGE_TYPE} ${MP_CPPC} $(MP_EXTRA_LD_PRE) -mprocessor=$(MP_PROCESSOR_OPTION) -o dist/${CND_CONF}/${IMAGE_TYPE}/LiquidSmoke.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} ${OBJECTFILES_QUOTED_IF_SPACED} -DXPRJ_default=$(CND_CONF) $(COMPARISON_BUILD) -Wl,--defsym=__MPLAB_BUILD=1$(MP_EXTRA_LD_POST)$(MP_LINKER_FILE_OPTION),--defsym=_min_heap_size=32K,--no-code-in-dinit,--no-dinit-in-serial-mem,-Map="${DISTDIR}/${PROJECTNAME}.${IMAGE_TYPE}.map",--memorysummary,dist/${CND_CONF}/${IMAGE_TYPE}/memoryfile.xml - ${MP_CC_DIR}/xc32-bin2hex dist/${CND_CONF}/${IMAGE_TYPE}/LiquidSmoke.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} + ${MP_CC_DIR}\\xc32-bin2hex dist/${CND_CONF}/${IMAGE_TYPE}/LiquidSmoke.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} endif @@ -181,7 +181,7 @@ endif # Enable dependency checking .dep.inc: .depcheck-impl -DEPFILES=$(shell "${PATH_TO_IDE_BIN}"mplabwildcard ${POSSIBLE_DEPFILES}) +DEPFILES=$(shell mplabwildcard ${POSSIBLE_DEPFILES}) ifneq (${DEPFILES},) include ${DEPFILES} endif diff --git a/nbproject/Makefile-genesis.properties b/nbproject/Makefile-genesis.properties index bd9d9ba..f2db881 100644 --- a/nbproject/Makefile-genesis.properties +++ b/nbproject/Makefile-genesis.properties @@ -1,9 +1,9 @@ # -#Sat May 05 14:33:20 CEST 2018 -default.com-microchip-mplab-nbide-toolchainXC32-XC32LanguageToolchain.md5=fcf9db1a3d46b4ef4e0a46afcbf02251 -default.languagetoolchain.dir=/opt/microchip/xc32/v2.05/bin -configurations-xml=4957a7627114c3c1c982e099652971a3 -com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=c8c2915d32f5d7e4be49831bc9827ab0 -default.languagetoolchain.version=2.05 -host.platform=linux +#Tue May 08 16:07:06 CEST 2018 +default.com-microchip-mplab-nbide-toolchainXC32-XC32LanguageToolchain.md5=002e07fc35a732566b3c80c1ed2897e8 +default.languagetoolchain.dir=C\:\\Program Files\\Microchip\\xc32\\v1.44\\bin +configurations-xml=2397e9904cff683529583ff173edf25d +com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=5d30ff5128b14865c8a3796a8f0bb8a0 +default.languagetoolchain.version=1.44 +host.platform=windows conf.ids=default diff --git a/nbproject/Makefile-local-default.mk b/nbproject/Makefile-local-default.mk index 39019b0..1dd99ba 100644 --- a/nbproject/Makefile-local-default.mk +++ b/nbproject/Makefile-local-default.mk @@ -14,23 +14,24 @@ # You can invoke make with the values of the macros: # $ makeMP_CC="/opt/microchip/mplabc30/v3.30c/bin/pic30-gcc" ... # -PATH_TO_IDE_BIN=/opt/microchip/mplabx/v4.15/mplab_ide/platform/../mplab_ide/modules/../../bin/ +SHELL=cmd.exe +PATH_TO_IDE_BIN=C:/Program Files/Microchip/MPLABX/v4.05/mplab_ide/platform/../mplab_ide/modules/../../bin/ # Adding MPLAB X bin directory to path. -PATH:=/opt/microchip/mplabx/v4.15/mplab_ide/platform/../mplab_ide/modules/../../bin/:$(PATH) +PATH:=C:/Program Files/Microchip/MPLABX/v4.05/mplab_ide/platform/../mplab_ide/modules/../../bin/:$(PATH) # Path to java used to run MPLAB X when this makefile was created -MP_JAVA_PATH="/opt/microchip/mplabx/v4.15/sys/java/jre1.8.0_144/bin/" +MP_JAVA_PATH="C:\Program Files\Microchip\MPLABX\v4.05\sys\java\jre1.8.0_144/bin/" OS_CURRENT="$(shell uname -s)" -MP_CC="/opt/microchip/xc32/v2.05/bin/xc32-gcc" -MP_CPPC="/opt/microchip/xc32/v2.05/bin/xc32-g++" +MP_CC="C:\Program Files\Microchip\xc32\v1.44\bin\xc32-gcc.exe" +MP_CPPC="C:\Program Files\Microchip\xc32\v1.44\bin\xc32-g++.exe" # MP_BC is not defined -MP_AS="/opt/microchip/xc32/v2.05/bin/xc32-as" -MP_LD="/opt/microchip/xc32/v2.05/bin/xc32-ld" -MP_AR="/opt/microchip/xc32/v2.05/bin/xc32-ar" -DEP_GEN=${MP_JAVA_PATH}java -jar "/opt/microchip/mplabx/v4.15/mplab_ide/platform/../mplab_ide/modules/../../bin/extractobjectdependencies.jar" -MP_CC_DIR="/opt/microchip/xc32/v2.05/bin" -MP_CPPC_DIR="/opt/microchip/xc32/v2.05/bin" +MP_AS="C:\Program Files\Microchip\xc32\v1.44\bin\xc32-as.exe" +MP_LD="C:\Program Files\Microchip\xc32\v1.44\bin\xc32-ld.exe" +MP_AR="C:\Program Files\Microchip\xc32\v1.44\bin\xc32-ar.exe" +DEP_GEN=${MP_JAVA_PATH}java -jar "C:/Program Files/Microchip/MPLABX/v4.05/mplab_ide/platform/../mplab_ide/modules/../../bin/extractobjectdependencies.jar" +MP_CC_DIR="C:\Program Files\Microchip\xc32\v1.44\bin" +MP_CPPC_DIR="C:\Program Files\Microchip\xc32\v1.44\bin" # MP_BC_DIR is not defined -MP_AS_DIR="/opt/microchip/xc32/v2.05/bin" -MP_LD_DIR="/opt/microchip/xc32/v2.05/bin" -MP_AR_DIR="/opt/microchip/xc32/v2.05/bin" +MP_AS_DIR="C:\Program Files\Microchip\xc32\v1.44\bin" +MP_LD_DIR="C:\Program Files\Microchip\xc32\v1.44\bin" +MP_AR_DIR="C:\Program Files\Microchip\xc32\v1.44\bin" # MP_BC_DIR is not defined diff --git a/nbproject/configurations.xml b/nbproject/configurations.xml index 8f500b7..db18a0b 100644 --- a/nbproject/configurations.xml +++ b/nbproject/configurations.xml @@ -18,6 +18,7 @@ mcc_generated_files/pin_manager.h mcc_generated_files/uart1.h + led.hpp mcc_generated_files/uart1.c main.cpp - led.hpp led.cpp PKOBSKDEPlatformTool XC32 - 2.05 - 2 + 1.44 + 3 @@ -225,6 +225,7 @@ + -- cgit v1.2.1