From c3767ac0c6bcb9a1aed1e7b666061f829a371e1f Mon Sep 17 00:00:00 2001
From: Nao Pross <naopross@thearcway.org>
Date: Fri, 4 May 2018 00:16:36 +0200
Subject: Start own HAL implementation based on MCC's generated files

Other changes:
 - Undo conversion of MCC files to C++
 - Delete old Led implementation
---
 mcc_generated_files/pin_manager.c | 138 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 138 insertions(+)
 create mode 100644 mcc_generated_files/pin_manager.c

(limited to 'mcc_generated_files/pin_manager.c')

diff --git a/mcc_generated_files/pin_manager.c b/mcc_generated_files/pin_manager.c
new file mode 100644
index 0000000..b0d4a93
--- /dev/null
+++ b/mcc_generated_files/pin_manager.c
@@ -0,0 +1,138 @@
+/**
+  System Interrupts Generated Driver File 
+
+  @Company:
+    Microchip Technology Inc.
+
+  @File Name:
+    pin_manager.c
+
+  @Summary:
+    This is the generated manager file for the MPLAB(c) Code Configurator device.  This manager
+    configures the pins direction, initial state, analog setting.
+    The peripheral pin select, PPS, configuration is also handled by this manager.
+
+  @Description:
+    This source file provides implementations for MPLAB(c) Code Configurator interrupts.
+    Generation Information : 
+        Product Revision  :  MPLAB(c) Code Configurator - 4.45
+        Device            :  PIC32MX470F512H
+        Version           :  1.02
+    The generated drivers are tested against the following:
+        Compiler          :  XC32 1.42
+        MPLAB             :  MPLAB X 3.55
+
+    Copyright (c) 2013 - 2015 released Microchip Technology Inc.  All rights reserved.
+
+    Microchip licenses to you the right to use, modify, copy and distribute
+    Software only when embedded on a Microchip microcontroller or digital signal
+    controller that is integrated into your product or third party product
+    (pursuant to the sublicense terms in the accompanying license agreement).
+
+    You should refer to the license agreement accompanying this Software for
+    additional information regarding your rights and obligations.
+
+    SOFTWARE AND DOCUMENTATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND,
+    EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, ANY WARRANTY OF
+    MERCHANTABILITY, TITLE, NON-INFRINGEMENT AND FITNESS FOR A PARTICULAR PURPOSE.
+    IN NO EVENT SHALL MICROCHIP OR ITS LICENSORS BE LIABLE OR OBLIGATED UNDER
+    CONTRACT, NEGLIGENCE, STRICT LIABILITY, CONTRIBUTION, BREACH OF WARRANTY, OR
+    OTHER LEGAL EQUITABLE THEORY ANY DIRECT OR INDIRECT DAMAGES OR EXPENSES
+    INCLUDING BUT NOT LIMITED TO ANY INCIDENTAL, SPECIAL, INDIRECT, PUNITIVE OR
+    CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST DATA, COST OF PROCUREMENT OF
+    SUBSTITUTE GOODS, TECHNOLOGY, SERVICES, OR ANY CLAIMS BY THIRD PARTIES
+    (INCLUDING BUT NOT LIMITED TO ANY DEFENSE THEREOF), OR OTHER SIMILAR COSTS.
+
+*/
+
+
+/**
+    Section: Includes
+*/
+#include "pin_manager.h"
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "mcc.h"
+#include <xc.h>
+#include <sys/attribs.h>
+
+/**
+    void PIN_MANAGER_Initialize(void)
+*/
+void PIN_MANAGER_Initialize(void)
+{
+    /****************************************************************************
+     * Setting the Output Latch SFR(s)
+     ***************************************************************************/
+    LATB = 0x0000;
+    LATC = 0x0000;
+    LATD = 0x0000;
+    LATE = 0x0000;
+    LATF = 0x0000;
+    LATG = 0x0000;
+
+    /****************************************************************************
+     * Setting the GPIO Direction SFR(s)
+     ***************************************************************************/
+    TRISB = 0xFFFF;
+    TRISC = 0xF000;
+    TRISD = 0x0FFF;
+    TRISE = 0x002F;
+    TRISF = 0x003A;
+    TRISG = 0x03C0;
+
+    /****************************************************************************
+     * Setting the Weak Pull Up and Weak Pull Down SFR(s)
+     ***************************************************************************/
+    CNPDB = 0x0000;
+    CNPDC = 0x0000;
+    CNPDD = 0x0000;
+    CNPDE = 0x0000;
+    CNPDF = 0x0000;
+    CNPDG = 0x0000;
+    CNPUB = 0x0000;
+    CNPUC = 0x0000;
+    CNPUD = 0x0000;
+    CNPUE = 0x0000;
+    CNPUF = 0x0000;
+    CNPUG = 0x0000;
+
+    /****************************************************************************
+     * Setting the Open Drain SFR(s)
+     ***************************************************************************/
+    ODCB = 0x0000;
+    ODCC = 0x0000;
+    ODCD = 0x0000;
+    ODCE = 0x0000;
+    ODCF = 0x0000;
+    ODCG = 0x0000;
+
+    /****************************************************************************
+     * Setting the Analog/Digital Configuration SFR(s)
+     ***************************************************************************/
+    ANSELB = 0xFFFC;
+    ANSELC = 0xF000;
+    ANSELD = 0x000E;
+    ANSELE = 0x00F4;
+    ANSELG = 0x03C0;
+
+    /****************************************************************************
+     * Set the PPS
+     ***************************************************************************/
+    SYSTEM_RegUnlock(); // unlock PPS
+    CFGCONbits.IOLOCK = 0;
+
+    U1RXRbits.U1RXR = 0x0004;   //RF1->UART1:U1RX;
+    RPF0Rbits.RPF0R = 0x0003;   //RF0->UART1:U1TX;
+
+    CFGCONbits.IOLOCK = 1; // lock   PPS
+    SYSTEM_RegLock(); 
+
+    
+}
+
+#ifdef __cplusplus
+}
+#endif
\ No newline at end of file
-- 
cgit v1.2.1