Protel Design System Design Rule Check
PCB File : Z:\SAMB_4\projects\xilofono\hw\Steps.PcbDoc
Date     : 22.02.2018
Time     : 16:14:03

Processing Rule : Clearance Constraint (Gap=0.254mm) (All),(All)
Rule Violations :0

Processing Rule : Short-Circuit Constraint (Allowed=No) (All),(All)
Rule Violations :0

Processing Rule : Un-Routed Net Constraint ( (All) )
Rule Violations :0

Processing Rule : Modified Polygon (Allow modified: No), (Allow shelved: No)
Rule Violations :0

Processing Rule : Width Constraint (Min=0.254mm) (Max=1.524mm) (Preferred=0.254mm) (All)
Rule Violations :0

Processing Rule : Power Plane Connect Rule(Relief Connect )(Expansion=0.508mm) (Conductor Width=0.254mm) (Air Gap=0.254mm) (Entries=4) (All)
Rule Violations :0

Processing Rule : Hole Size Constraint (Min=0.025mm) (Max=10mm) (All)
Rule Violations :0

Processing Rule : Hole To Hole Clearance (Gap=0.254mm) (All),(All)
Rule Violations :0

Processing Rule : Minimum Solder Mask Sliver (Gap=0.254mm) (All),(All)
Rule Violations :0

Processing Rule : Silk To Solder Mask (Clearance=0mm) (IsPad),(All)
Rule Violations :0

Processing Rule : Silk to Silk (Clearance=0mm) (All),(All)
Rule Violations :0

Processing Rule : Net Antennae (Tolerance=0mm) (All)
Rule Violations :0

Processing Rule : Room PZ12 (Bounding Region = (357.124mm, 46.99mm, 370.84mm, 77.47mm) (InComponentClass('PZ12'))
Rule Violations :0

Processing Rule : Room PZ10 (Bounding Region = (329.184mm, 46.99mm, 342.9mm, 77.47mm) (InComponentClass('PZ10'))
Rule Violations :0

Processing Rule : Room PZ11 (Bounding Region = (343.154mm, 46.99mm, 356.87mm, 77.47mm) (InComponentClass('PZ11'))
Rule Violations :0

Processing Rule : Room PZ15 (Bounding Region = (399.034mm, 46.99mm, 412.75mm, 77.47mm) (InComponentClass('PZ15'))
Rule Violations :0

Processing Rule : Room Steps (Bounding Region = (414.02mm, 11.43mm, 490.474mm, 248.92mm) (InComponentClass('Steps'))
Rule Violations :0

Processing Rule : Room PZ14 (Bounding Region = (385.064mm, 46.99mm, 398.78mm, 77.47mm) (InComponentClass('PZ14'))
Rule Violations :0

Processing Rule : Room PZ1 (Bounding Region = (203.454mm, 46.99mm, 217.17mm, 77.47mm) (InComponentClass('PZ1'))
Rule Violations :0

Processing Rule : Room PZ13 (Bounding Region = (371.094mm, 46.99mm, 384.81mm, 77.47mm) (InComponentClass('PZ13'))
Rule Violations :0

Processing Rule : Room PZ9 (Bounding Region = (315.214mm, 46.99mm, 328.93mm, 77.47mm) (InComponentClass('PZ9'))
Rule Violations :0

Processing Rule : Room PZ5 (Bounding Region = (259.334mm, 46.99mm, 273.05mm, 77.47mm) (InComponentClass('PZ5'))
Rule Violations :0

Processing Rule : Room PZ4 (Bounding Region = (245.364mm, 46.99mm, 259.08mm, 77.47mm) (InComponentClass('PZ4'))
Rule Violations :0

Processing Rule : Room PZ2 (Bounding Region = (217.424mm, 46.99mm, 231.14mm, 77.47mm) (InComponentClass('PZ2'))
Rule Violations :0

Processing Rule : Room PZ6 (Bounding Region = (273.304mm, 46.99mm, 287.02mm, 77.47mm) (InComponentClass('PZ6'))
Rule Violations :0

Processing Rule : Room PZ3 (Bounding Region = (231.394mm, 46.99mm, 245.11mm, 77.47mm) (InComponentClass('PZ3'))
Rule Violations :0

Processing Rule : Room PZ8 (Bounding Region = (301.244mm, 46.99mm, 314.96mm, 77.47mm) (InComponentClass('PZ8'))
Rule Violations :0

Processing Rule : Room PZ7 (Bounding Region = (287.274mm, 46.99mm, 300.99mm, 77.47mm) (InComponentClass('PZ7'))
Rule Violations :0

Processing Rule : Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All)
Rule Violations :0


Violations Detected : 0
Waived Violations : 0
Time Elapsed        : 00:00:03