| Rule Violations |
Count |
| Clearance Constraint (Gap=0.254mm) (All),(All) |
0 |
| Short-Circuit Constraint (Allowed=No) (All),(All) |
0 |
| Un-Routed Net Constraint ( (All) ) |
0 |
| Modified Polygon (Allow modified: No), (Allow shelved: No) |
0 |
| Width Constraint (Min=0.254mm) (Max=1.524mm) (Preferred=0.254mm) (All) |
0 |
| Power Plane Connect Rule(Relief Connect )(Expansion=0.508mm) (Conductor Width=0.254mm) (Air Gap=0.254mm) (Entries=4) (All) |
0 |
| Hole Size Constraint (Min=0.025mm) (Max=10mm) (All) |
0 |
| Hole To Hole Clearance (Gap=0.254mm) (All),(All) |
0 |
| Minimum Solder Mask Sliver (Gap=0.254mm) (All),(All) |
0 |
| Silk To Solder Mask (Clearance=0mm) (IsPad),(All) |
0 |
| Silk to Silk (Clearance=0mm) (All),(All) |
0 |
| Net Antennae (Tolerance=0mm) (All) |
0 |
| Room PZ12 (Bounding Region = (357.124mm, 46.99mm, 370.84mm, 77.47mm) (InComponentClass('PZ12')) |
0 |
| Room PZ10 (Bounding Region = (329.184mm, 46.99mm, 342.9mm, 77.47mm) (InComponentClass('PZ10')) |
0 |
| Room PZ11 (Bounding Region = (343.154mm, 46.99mm, 356.87mm, 77.47mm) (InComponentClass('PZ11')) |
0 |
| Room PZ15 (Bounding Region = (399.034mm, 46.99mm, 412.75mm, 77.47mm) (InComponentClass('PZ15')) |
0 |
| Room Steps (Bounding Region = (414.02mm, 11.43mm, 490.474mm, 248.92mm) (InComponentClass('Steps')) |
0 |
| Room PZ14 (Bounding Region = (385.064mm, 46.99mm, 398.78mm, 77.47mm) (InComponentClass('PZ14')) |
0 |
| Room PZ1 (Bounding Region = (203.454mm, 46.99mm, 217.17mm, 77.47mm) (InComponentClass('PZ1')) |
0 |
| Room PZ13 (Bounding Region = (371.094mm, 46.99mm, 384.81mm, 77.47mm) (InComponentClass('PZ13')) |
0 |
| Room PZ9 (Bounding Region = (315.214mm, 46.99mm, 328.93mm, 77.47mm) (InComponentClass('PZ9')) |
0 |
| Room PZ5 (Bounding Region = (259.334mm, 46.99mm, 273.05mm, 77.47mm) (InComponentClass('PZ5')) |
0 |
| Room PZ4 (Bounding Region = (245.364mm, 46.99mm, 259.08mm, 77.47mm) (InComponentClass('PZ4')) |
0 |
| Room PZ2 (Bounding Region = (217.424mm, 46.99mm, 231.14mm, 77.47mm) (InComponentClass('PZ2')) |
0 |
| Room PZ6 (Bounding Region = (273.304mm, 46.99mm, 287.02mm, 77.47mm) (InComponentClass('PZ6')) |
0 |
| Room PZ3 (Bounding Region = (231.394mm, 46.99mm, 245.11mm, 77.47mm) (InComponentClass('PZ3')) |
0 |
| Room PZ8 (Bounding Region = (301.244mm, 46.99mm, 314.96mm, 77.47mm) (InComponentClass('PZ8')) |
0 |
| Room PZ7 (Bounding Region = (287.274mm, 46.99mm, 300.99mm, 77.47mm) (InComponentClass('PZ7')) |
0 |
| Height Constraint (Min=0mm) (Max=25.4mm) (Prefered=12.7mm) (All) |
0 |
| Total |
0 |
