1 files changed, 149 insertions, 0 deletions
diff --git a/sw/z80/kernel/include/usart.h b/sw/z80/kernel/include/usart.h
new file mode 100644
index 0000000..3e5c070
--- /dev/null
+++ b/sw/z80/kernel/include/usart.h
@@ -0,0 +1,149 @@
+#ifndef __USART_H__
+#define __USART_H__
+
+#include "types.h"
+#include "devices.h"
+
+#include "string.h"
+
+// baudrate clock divisors 
+// values from TL16C550C datasheet (table 9 for 1.8432 MHz crystal)
+#define USART_BAUDRATE_50       2304
+#define USART_BAUDRATE_75       1536
+#define USART_BAUDRATE_110      1047
+#define USART_BAUDRATE_134_5    857
+#define USART_BAUDRATE_150      768
+#define USART_BAUDRATE_300      384
+#define USART_BAUDRATE_600      192
+#define USART_BAUDRATE_1200     96
+#define USART_BAUDRATE_1800     64
+#define USART_BAUDRATE_2000     58
+#define USART_BAUDRATE_2400     48
+#define USART_BAUDRATE_3600     32
+#define USART_BAUDRATE_4800     24
+#define USART_BAUDRATE_7200     16
+#define USART_BAUDRATE_9600     12
+#define USART_BAUDRATE_19200    6
+#define USART_BAUDRATE_38400    3
+#define USART_BAUDRATE_56000    3
+
+// parity
+#define USART_PARITY_NONE       0
+#define USART_PARITY_EVEN       1
+#define USART_PARITY_ODD        2
+
+// stop bits
+#define USART_STOP_BITS_1       10
+#define USART_STOP_BITS_15      15
+#define USART_STOP_BITS_2       20
+
+// word lenght
+#define USART_WORD_LENGTH_5     0
+#define USART_WORD_LENGTH_6     1
+#define USART_WORD_LENGTH_7     2
+#define USART_WORD_LENGTH_8     3
+
+// autoflow
+#define USART_AUTOFLOW_ALL      3
+#define USART_AUTOFLOW_CTS      2
+#define USART_AUTOFLOW_OFF      0
+
+
+/* this structure is only for internal usage */
+struct _usart_device
+{
+    register_t buffer;  // also used as LSB for divisor latch
+
+    struct IER 
+    {
+        volatile int received_data_interrupt :1;
+        volatile int transmitter_empty_interrupt :1;
+        volatile int receiver_line_status_interrupt :1;
+        volatile int modem_status_interrupt :1;
+        volatile int reserved :4;
+    } IER;
+
+    struct IIR
+    {
+        volatile int interrupt_pending :1;
+        volatile int interrupt_id :3;
+        volatile int reserved :2;
+        volatile int fifos :2;
+    } IIR;
+
+    struct FCR
+    {
+        volatile int fifo_enable :1;
+        volatile int receiver_fifo_rst :1;
+        volatile int trasmitter_fifo_rst :1;
+        volatile int dma_mode_select :1;
+        volatile int reserved :1;
+        volatile int receiver_trigger :2;
+    } FCR;
+
+    struct LCR
+    {
+        volatile int word_length :2;
+        volatile int stop_bits :1;
+        volatile int parity :1;
+        volatile int even_parity :1;
+        volatile int stick_parity :1;
+        volatile int break_control :1;
+        volatile int divisor_latch_access :1;
+    } LCR;
+
+    struct MCR
+    {
+        volatile int data_terminal_ready :1;
+        volatile int request_to_send :1;
+        volatile int out1;
+        volatile int out2;
+        volatile int loop;
+        volatile int autoflow :1;
+        volatile int reserved :2;
+    } MCR;
+
+    struct LSR 
+    {
+        volatile int data_ready :1;
+        volatile int overrun_error :1;
+        volatile int parity_error :1;
+        volatile int framing_error :1;
+        volatile int break_interrupt :1;
+        volatile int transmitter_holder_empty :1;
+        volatile int transmitter_empty :1;
+        volatile int fifo_recv_error :1;
+    } LSR;
+
+    struct MSR
+    {
+        volatile int delta_cts :1;
+        volatile int delta_data_set_ready :1;
+        volatile int trailing_edge_ring_indicator :1;
+        volatile int delta_data_carrier_detect :1;
+        volatile int clear_to_send :1;
+        volatile int data_set_ready :1;
+        volatile int ring_indicator :1;
+        volatile int data_carrier_detect :1;
+    } MSR;
+
+    register_t scratch;
+};
+
+
+// setup functions (wrappers)
+void usart_set_baudrate(uint16_t baudrate);
+void usart_set_parity(int mode);
+void usart_set_stop_bits(int count);
+void usart_set_word_length(int length);
+void usart_set_autoflow(int mode);
+
+inline void usart_init(uint16_t baudrate, int parity, int stop_bits); 
+
+void usart_transmit(uint8_t data);
+uint8_t usart_receive();
+
+int usart_write(uint8_t *data, size_t size);
+int usart_read(uint8_t *buffer, size_t count);
+
+#endif // __USART__H__