diff options
Diffstat (limited to '')
| -rw-r--r-- | sw/z80/kernel/include/devices.h | 13 | ||||
| -rw-r--r-- | sw/z80/kernel/include/pio.h | 35 | ||||
| -rw-r--r-- | sw/z80/kernel/include/types.h | 4 | ||||
| -rw-r--r-- | sw/z80/kernel/include/usart.h | 149 |
4 files changed, 201 insertions, 0 deletions
diff --git a/sw/z80/kernel/include/devices.h b/sw/z80/kernel/include/devices.h new file mode 100644 index 0000000..e8c183f --- /dev/null +++ b/sw/z80/kernel/include/devices.h @@ -0,0 +1,13 @@ +#ifndef __DEVICES_H__ +#define __DEVICES_H__ + +#define ADDR_DEV_ROM_L 0x0000 +#define ADDR_DEV_ROM_H 0x2000 + +#define ADDR_DEV_USART 0x4000 +#define ADDR_DEV_CTC 0x4100 +#define ADDR_DEV_PIO 0x4200 + +#define ADDR_DEV_RAM 0x8000 + +#endif diff --git a/sw/z80/kernel/include/pio.h b/sw/z80/kernel/include/pio.h new file mode 100644 index 0000000..5d289ca --- /dev/null +++ b/sw/z80/kernel/include/pio.h @@ -0,0 +1,35 @@ +#ifndef __PIO_H__ +#define __PIO_H__ + +#include "devices.h" +#include "types.h" + +#define PIO_A 0 +#define PIO_B 1 + +#define PIO_MODE_0 0 +#define PIO_MODE_1 1 +#define PIO_MODE_2 2 +#define PIO_MODE_3 3 + +#define PIO_INT_ACTIVE_HIGH (1<<5) +#define PIO_INT_AND_MODE (1<<6) +#define PIO_INT_ENABLE (1<<7) + + +void _pio_data(int port, uint8_t data); +void _pio_command(int port, uint8_t cmd); + +void pio_set_mode(int port, int mode); +void pio_set_interrupts(int port, int control); +void pio_set_interrupts_mask(int port, uint8_t mask); +void pio_set_io(int port, uint8_t io); + +// uint8_t pio_read_data(int port); + +inline int pio_read_pin(int port, uint8_t pin); +inline void pio_write_pin(int port, uint8_t pin); + +// TODO: implement mode (in/out/both) and interrupt vector + +#endif // __PIO_H__ diff --git a/sw/z80/kernel/include/types.h b/sw/z80/kernel/include/types.h index adde214..552b7e9 100644 --- a/sw/z80/kernel/include/types.h +++ b/sw/z80/kernel/include/types.h @@ -1,9 +1,13 @@ #ifndef __TYPES_H__ #define __TYPES_H__ +#define register_t volatile unsigned char + #define int8_t char #define uint8_t unsigned char #define int16_t int #define uint16_t unsigned int +#define size_t uint16_t + #endif diff --git a/sw/z80/kernel/include/usart.h b/sw/z80/kernel/include/usart.h new file mode 100644 index 0000000..3e5c070 --- /dev/null +++ b/sw/z80/kernel/include/usart.h @@ -0,0 +1,149 @@ +#ifndef __USART_H__ +#define __USART_H__ + +#include "types.h" +#include "devices.h" + +#include "string.h" + +// baudrate clock divisors +// values from TL16C550C datasheet (table 9 for 1.8432 MHz crystal) +#define USART_BAUDRATE_50 2304 +#define USART_BAUDRATE_75 1536 +#define USART_BAUDRATE_110 1047 +#define USART_BAUDRATE_134_5 857 +#define USART_BAUDRATE_150 768 +#define USART_BAUDRATE_300 384 +#define USART_BAUDRATE_600 192 +#define USART_BAUDRATE_1200 96 +#define USART_BAUDRATE_1800 64 +#define USART_BAUDRATE_2000 58 +#define USART_BAUDRATE_2400 48 +#define USART_BAUDRATE_3600 32 +#define USART_BAUDRATE_4800 24 +#define USART_BAUDRATE_7200 16 +#define USART_BAUDRATE_9600 12 +#define USART_BAUDRATE_19200 6 +#define USART_BAUDRATE_38400 3 +#define USART_BAUDRATE_56000 3 + +// parity +#define USART_PARITY_NONE 0 +#define USART_PARITY_EVEN 1 +#define USART_PARITY_ODD 2 + +// stop bits +#define USART_STOP_BITS_1 10 +#define USART_STOP_BITS_15 15 +#define USART_STOP_BITS_2 20 + +// word lenght +#define USART_WORD_LENGTH_5 0 +#define USART_WORD_LENGTH_6 1 +#define USART_WORD_LENGTH_7 2 +#define USART_WORD_LENGTH_8 3 + +// autoflow +#define USART_AUTOFLOW_ALL 3 +#define USART_AUTOFLOW_CTS 2 +#define USART_AUTOFLOW_OFF 0 + + +/* this structure is only for internal usage */ +struct _usart_device +{ + register_t buffer; // also used as LSB for divisor latch + + struct IER + { + volatile int received_data_interrupt :1; + volatile int transmitter_empty_interrupt :1; + volatile int receiver_line_status_interrupt :1; + volatile int modem_status_interrupt :1; + volatile int reserved :4; + } IER; + + struct IIR + { + volatile int interrupt_pending :1; + volatile int interrupt_id :3; + volatile int reserved :2; + volatile int fifos :2; + } IIR; + + struct FCR + { + volatile int fifo_enable :1; + volatile int receiver_fifo_rst :1; + volatile int trasmitter_fifo_rst :1; + volatile int dma_mode_select :1; + volatile int reserved :1; + volatile int receiver_trigger :2; + } FCR; + + struct LCR + { + volatile int word_length :2; + volatile int stop_bits :1; + volatile int parity :1; + volatile int even_parity :1; + volatile int stick_parity :1; + volatile int break_control :1; + volatile int divisor_latch_access :1; + } LCR; + + struct MCR + { + volatile int data_terminal_ready :1; + volatile int request_to_send :1; + volatile int out1; + volatile int out2; + volatile int loop; + volatile int autoflow :1; + volatile int reserved :2; + } MCR; + + struct LSR + { + volatile int data_ready :1; + volatile int overrun_error :1; + volatile int parity_error :1; + volatile int framing_error :1; + volatile int break_interrupt :1; + volatile int transmitter_holder_empty :1; + volatile int transmitter_empty :1; + volatile int fifo_recv_error :1; + } LSR; + + struct MSR + { + volatile int delta_cts :1; + volatile int delta_data_set_ready :1; + volatile int trailing_edge_ring_indicator :1; + volatile int delta_data_carrier_detect :1; + volatile int clear_to_send :1; + volatile int data_set_ready :1; + volatile int ring_indicator :1; + volatile int data_carrier_detect :1; + } MSR; + + register_t scratch; +}; + + +// setup functions (wrappers) +void usart_set_baudrate(uint16_t baudrate); +void usart_set_parity(int mode); +void usart_set_stop_bits(int count); +void usart_set_word_length(int length); +void usart_set_autoflow(int mode); + +inline void usart_init(uint16_t baudrate, int parity, int stop_bits); + +void usart_transmit(uint8_t data); +uint8_t usart_receive(); + +int usart_write(uint8_t *data, size_t size); +int usart_read(uint8_t *buffer, size_t count); + +#endif // __USART__H__ |