From 43be150dc6e84f6f6eeb071cd3cdb7fc21125d60 Mon Sep 17 00:00:00 2001
From: Nao Pross <naopross@thearcway.org>
Date: Tue, 30 Oct 2018 11:41:24 +0100
Subject: Move sw to sw-old and hw to hw-altium, add kicad files

---
 sw-old/cpld/address_decoder.vco | 147 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 147 insertions(+)
 create mode 100755 sw-old/cpld/address_decoder.vco

(limited to 'sw-old/cpld/address_decoder.vco')

diff --git a/sw-old/cpld/address_decoder.vco b/sw-old/cpld/address_decoder.vco
new file mode 100755
index 0000000..229e06f
--- /dev/null
+++ b/sw-old/cpld/address_decoder.vco
@@ -0,0 +1,147 @@
+[DEVICE]
+
+Family = M4;
+PartType = M4-32/32;
+Package = 44PLCC;
+PartNumber = M4-32/32-15JC;
+Speed = -15;
+Operating_condition = COM;
+EN_Segment = NO;
+Pin_MC_1to1 = NO;
+Voltage = 5.0;
+
+[REVISION]
+
+RCS = "$Revision: 1.24 $";
+Parent = m4.vci;
+SDS_file = m4.sds;
+Design = address_decoder.tt4;
+Rev = 0.01;
+DATE = 11/23/17;
+TIME = 11:55:45;
+Type = TT2;
+Pre_Fit_Time = 1;
+Source_Format = ABEL_Schematic;
+
+[IGNORE ASSIGNMENTS]
+
+Pin_Assignments = NO;
+Pin_Keep_Block = NO;
+Pin_Keep_Segment = NO;
+Group_Assignments = NO;
+Macrocell_Assignments = NO;
+Macrocell_Keep_Block = NO;
+Macrocell_Keep_Segment = NO;
+Pin_Reservation = NO;
+Timing_Constraints = NO;
+Block_Reservation = NO;
+Segment_Reservation = NO;
+Ignore_Source_Location = NO;
+Ignore_Source_Optimization = NO;
+Ignore_Source_Timing = NO;
+
+[CLEAR ASSIGNMENTS]
+
+Pin_Assignments = NO;
+Pin_Keep_Block = NO;
+Pin_Keep_Segment = NO;
+Group_Assignments = NO;
+Macrocell_Assignments = NO;
+Macrocell_Keep_Block = NO;
+Macrocell_Keep_Segment = NO;
+Pin_Reservation = NO;
+Timing_Constraints = NO;
+Block_Reservation = NO;
+Segment_Reservation = NO;
+Ignore_Source_Location = NO;
+Ignore_Source_Optimization = NO;
+Ignore_Source_Timing = NO;
+
+[BACKANNOTATE NETLIST]
+
+Netlist = VHDL;
+Delay_File = SDF;
+Generic_VCC = ;
+Generic_GND = ;
+
+[BACKANNOTATE ASSIGNMENTS]
+
+Pin_Assignment = NO;
+Pin_Block = NO;
+Pin_Macrocell_Block = NO;
+Routing = NO;
+
+[GLOBAL PROJECT OPTIMIZATION]
+
+Balanced_Partitioning = YES;
+Spread_Placement = YES;
+Max_Pin_Percent = 100;
+Max_Macrocell_Percent = 100;
+Max_Inter_Seg_Percent = 100;
+Max_Seg_In_Percent = 100;
+Max_Blk_In_Percent = 100;
+
+[FITTER REPORT FORMAT]
+
+Fitter_Options = YES;
+Pinout_Diagram = NO;
+Pinout_Listing = YES;
+Detailed_Block_Segment_Summary = YES;
+Input_Signal_List = YES;
+Output_Signal_List = YES;
+Bidir_Signal_List = YES;
+Node_Signal_List = YES;
+Signal_Fanout_List = YES;
+Block_Segment_Fanin_List = YES;
+Prefit_Eqn = YES;
+Postfit_Eqn = YES;
+Page_Break = YES;
+
+[OPTIMIZATION OPTIONS]
+
+Logic_Reduction = YES;
+Max_PTerm_Split = 16;
+Max_PTerm_Collapse = 16;
+XOR_Synthesis = YES;
+Node_Collapse = Yes;
+DT_Synthesis = Yes;
+
+[FITTER GLOBAL OPTIONS]
+
+Run_Time = 0;
+Set_Reset_Dont_Care = NO;
+In_Reg_Optimize = YES;
+Clock_Optimize = NO;
+Conf_Unused_IOs = OUT_LOW;
+
+[POWER]
+
+[HARDWARE DEVICE OPTIONS]
+
+[PIN RESERVATIONS]
+layer = OFF;
+
+[LOCATION ASSIGNMENT]
+
+Layer = OFF;
+MMU_IN_7_ = INPUT,2, A,-;
+MMU_IN_6_ = INPUT,3, A,-;
+MMU_IN_15_ = INPUT,21, A,-;
+MMU_IN_5_ = INPUT,4, A,-;
+MMU_IN_4_ = INPUT,5, A,-;
+MMU_OUT_15_ = OUTPUT,36, B,-;
+MMU_IN_3_ = INPUT,6, A,-;
+IORQ = INPUT,30, B,-;
+MMU_IN_2_ = INPUT,7, A,-;
+CSROML = OUTPUT,24, B,-;
+CSROMH = OUTPUT,25, B,-;
+MMU_OUT_14_ = OUTPUT,37, B,-;
+CSRAM = OUTPUT,26, B,-;
+MMU_OUT_13_ = OUTPUT,38, B,-;
+CSUART = OUTPUT,27, B,-;
+MMU_OUT_12_ = OUTPUT,39, B,-;
+CSCTC = OUTPUT,28, B,-;
+CSPIO = OUTPUT,29, B,-;
+MMU_IN_14_ = INPUT,20, A,-;
+MMU_IN_13_ = INPUT,19, A,-;
+MMU_IN_12_ = INPUT,18, A,-;
-- 
cgit v1.2.1