Rule Violations |
Count |
Power Plane Connect Rule(NoConnect Connect )(Expansion=20mil) (Conductor Width=10mil) (Air Gap=10mil) (Entries=4) ((ObjectKind = 'Pad') and (Name Like '*DEC*')) |
0 |
Net Antennae (Tolerance=0mil) (All) |
0 |
Silk to Silk (Clearance=7.874mil) (All),(All) |
2 |
Silk To Solder Mask (Clearance=7.874mil) (IsPad),(All) |
9 |
Minimum Solder Mask Sliver (Gap=3.15mil) (All),(All) |
0 |
Hole To Hole Clearance (Gap=13.78mil) (All),(All) |
0 |
Height Constraint (Min=0mil) (Max=984.252mil) (Prefered=492.126mil) (All) |
0 |
Pads and Vias to follow the Drill pairs settings |
0 |
Hole Size Constraint (Min=9.842mil) (Max=78.74mil) (All) |
7 |
Component Clearance Constraint ( Horizontal Gap = 9.842mil, Vertical Gap = 9.842mil ) (All),(All) |
0 |
Minimum Annular Ring (Minimum=6.89mil) (((ObjectKind = 'Pad') OR (ObjectKind = 'Via')) And (Layer = 'MultiLayer') And (HoleDiameter <= AsMM(0.45))) |
0 |
Minimum Annular Ring (Minimum=6.89mil) (((ObjectKind = 'Pad') OR (ObjectKind = 'Via')) And (Layer = 'MultiLayer') And (HoleDiameter > AsMM(0.45))) |
0 |
Un-Routed Net Constraint ( (All) ) |
4 |
Short-Circuit Constraint (Allowed=No) (All),(All) |
0 |
Power Plane Connect Rule(Relief Connect )(Expansion=6.89mil) (Conductor Width=7.874mil) (Air Gap=7.874mil) (Entries=4) (All) |
0 |
Width Constraint (Min=6mil) (Max=60mil) (Preferred=10mil) (All) |
0 |
Clearance Constraint (Gap=5.905mil) (All),(All) |
0 |
Modified Polygon (Allow modified: No), (Allow shelved: No) |
0 |
Board Clearance Constraint (Gap=0mil) (All) |
18 |
Total |
40 |