Rename flowgraph data files and remove static simulations

1 files changed, 24 insertions, 24 deletions

diff --git a/doc/thesis/chapters/implementation.tex b/doc/thesis/chapters/implementation.tex
index e3a5a86..29cfca0 100644
--- a/doc/thesis/chapters/implementation.tex
+++ b/doc/thesis/chapters/implementation.tex
@@ -329,14 +329,14 @@ Thus, they will be distributed among the other whole numbers. A window function
 %	}
 %\end{figure}
 %
-\begin{figure}
-	\centering
-	\input{figures/tikz/qpsk-sim-constellations-dynamic}
-	\caption{
-		Constellation diagrams for a simulated link using QPSK with AWGN and Rayleighan fading. The paramters are: frequency offset of 0.2 \%, \SI{100}{\milli\volt} noise, dopper shift for \(v = \SI{2}{\meter\per\second}\), and a NLOS urban PDP.
-	}
-	\label{fig:dynamic-exp}
-\end{figure}
+% \begin{figure}
+% 	\centering
+% 	\input{figures/tikz/qpsk-sim-constellations-dynamic}
+% 	\caption{
+% 		Constellation diagrams for a simulated link using QPSK with AWGN and Rayleighan fading. The paramters are: frequency offset of 0.2 \%, \SI{100}{\milli\volt} noise, dopper shift for \(v = \SI{2}{\meter\per\second}\), and a NLOS urban PDP.
+% 	}
+% 	\label{fig:dynamic-exp}
+% \end{figure}
 
 \subsection{Fading with statistical model}
 
@@ -390,14 +390,14 @@ and
 	\caption{Values used for the simulation \cite{ETSI}. \label{tab:etsi-tap-values}}
 \end{table}
 
-\begin{figure}
-	\centering
-	\input{figures/tikz/qpsk-sim-constellations-dynamic-exp-NLOS-5}
-	\caption{
-		Constellation diagrams for a simulated link using QPSK and Rayleighan fading. With the ETU model and a Doppler frequency of \(\SI{5}{\hertz}\).
-	}
-	\label{fig:dynamic-exp-real}
-\end{figure}
+% \begin{figure}
+% 	\centering
+% 	\input{figures/tikz/qpsk-sim-constellations-dynamic-exp-NLOS-5}
+% 	\caption{
+% 		Constellation diagrams for a simulated link using QPSK and Rayleighan fading. With the ETU model and a Doppler frequency of \(\SI{5}{\hertz}\).
+% 	}
+% 	\label{fig:dynamic-exp-real}
+% \end{figure}
 
 
 \subsection{Measurements}
@@ -474,14 +474,14 @@ The second part which is missing is to be able to change the timing plot for the
 \newgeometry{
 	inner = 15mm, outer = 15mm,
 }
-\begin{figure}
-	\centering
-	\input{figures/tikz/qpsk-simulations-static}
-	\caption{
-		QPSK static TODO.
-	}
-\end{figure}
-\newpage
+% \begin{figure}
+% 	\centering
+% 	\input{figures/tikz/qpsk-simulations-static}
+% 	\caption{
+% 		QPSK static TODO.
+% 	}
+% \end{figure}
+% \newpage
 \begin{figure}
 	\centering
 	\input{figures/tikz/qpsk-simulations-dynamic}