aboutsummaryrefslogtreecommitdiffstats
path: root/doc/thesis
diff options
context:
space:
mode:
authorNao Pross <np@0hm.ch>2021-12-16 07:22:56 +0100
committerNao Pross <np@0hm.ch>2021-12-16 07:22:56 +0100
commit1a5ad4dc884d00ce7933f526eb012a2ff475f31b (patch)
tree9209f4785e2754f898504e1a1d9267bf1c451785 /doc/thesis
parentConstellation plots (diff)
downloadFading-1a5ad4dc884d00ce7933f526eb012a2ff475f31b.tar.gz
Fading-1a5ad4dc884d00ce7933f526eb012a2ff475f31b.zip
Small corrections
Diffstat (limited to 'doc/thesis')
-rw-r--r--doc/thesis/chapters/implementation.tex6
-rw-r--r--doc/thesis/chapters/theory.tex60
2 files changed, 33 insertions, 33 deletions
diff --git a/doc/thesis/chapters/implementation.tex b/doc/thesis/chapters/implementation.tex
index ad33424..06ab37f 100644
--- a/doc/thesis/chapters/implementation.tex
+++ b/doc/thesis/chapters/implementation.tex
@@ -86,7 +86,7 @@ As receivers and transmitter devices for the SDR setup two USRP B210 devices fro
}
\end{figure}
-To compute the empirical bit error rate (BER) of the setup, the data has to be framed by the sender and the bitstream synchronized on the receiver side. The structure of a data packet used in the implementation is shown in \figref{fig:dataframe}. A frame begins with an user specified \(k\)-byte preamble, that in the current implementation serves as synchronization pattern. Another use case for the preamble sequence could be to introduce channel estimation pilot symbols. Following the preamble are 4 bytes encoded using a (31, 26) Hamming code (plus 1 padding bit), that contain metadata about the packet, namely payload ID and payload length. Because the payload length in bytes is encoded in 21 bits, the maximum payload size is 2 MiB, which together with 32 possible unique IDs gives a maximum data transfer with unique frame headers of 64 MiB. These constraints are a result of decisions made to keep the implementation simple.
+To compute the empirical bit error rate (BER) of the setup, the data has to be framed by the sender and the bitstream synchronized on the receiver side. The structure of a data packet used in the implementation is shown in \figref{fig:dataframe}. A frame begins with an user specified \(k\)-byte preamble, that in the current implementation serves as synchronization pattern. Another use case for the preamble sequence could be to introduce channel estimation pilot symbols. Following the preamble are 4 bytes encoded using a (31, 26) Hamming code (plus 1 padding bit), that contain metadata about the packet, namely payload ID and payload length. Because the payload length in bytes is encoded in 21 bits, the theoretical maximum payload size is 2 MiB, which together with 32 possible unique IDs gives a maximum data transfer with unique frame headers of 64 MiB. These constraints are a result of decisions made to keep the implementation simple.
\subsection{Modulation}
@@ -169,7 +169,7 @@ Because the frequency estimate is linearly interpolated, the phase error may not
\iff T = 1/f_s \leq \frac{1}{2\Delta f N' \kappa},
\iff N' \leq \frac{1}{2\Delta f T \kappa},
\end{equation}
-must hold. By further setting \(\kappa = 4\) and \(N' = 32\) we obtain a minimum sampling frequency of approximately \(\SI{618.5}{\kilo\hertz}\), or conversely by letting \(f_s = \SI{1}{\mega\hertz}\) we have a maximum frame length of \(N' = 51\) symbols. In other words, roughly every 50 symbols the system must send an access code sequence.
+must hold. By further setting \(\kappa = 4\) and \(N' = 32\) we obtain a minimum sampling frequency of approximately \(\SI{618.5}{\kilo\hertz}\), or conversely by letting \(f_s = \SI{1}{\mega\hertz}\) we have a maximum frame length of \(N' = 51\) symbols. In other words, roughly every 50 symbols the system must send an access code sequence. This result is rather unfortunate as it requires a lot more processing power than expected.
\begin{lstlisting}[
texcl = true, language = python, escapechar = {`},
@@ -430,7 +430,7 @@ For generating the Byte error rate it is focus on byte-blocks of a specific leng
return len(inp)
\end{lstlisting}
-\section{Technical pro
+% \section{Technical pro}
\section{Issue with the current implementation}
diff --git a/doc/thesis/chapters/theory.tex b/doc/thesis/chapters/theory.tex
index 3de58eb..6cf3520 100644
--- a/doc/thesis/chapters/theory.tex
+++ b/doc/thesis/chapters/theory.tex
@@ -121,18 +121,19 @@ Knowing why there is a need for orthogonal carriers, we should now discuss which
\end{equation}
The Hilbert transform is a linear operator that introduces a phase shift of \(\pi / 2\) over all frequencies \cite{Hsu,Gallager}, and it is possible to show that given a real valued function \(g(t)\) then \(\langle g, \hilbert g \rangle = 0\) \cite{Kschischang,Kneubuehler}. There are many functions that are Hilbert transform pairs, however in practice the pair \(\phi_i(t) = \cos(\omega_c t)\) and \(\phi_q(t) = \hilbert \phi_i(t) = \sin(\omega_c t)\) is always used.
-\paragraph{Oscillator and phase shifter}
-
-\skelpar[4]{Give a few details on how the carrier is generated in practice.}
+% \paragraph{Oscillator and phase shifter}
+% \skelpar[4]{Give a few details on how the carrier is generated in practice.}
% \subsection{Spectral properties of a QAM signal}
% \skelpar[4]{Spectral properties of QAM}
\section{Phase shift keying (\(M\)-PSK)}
-Phase shift keying is another popular family of modulation schemes for digital signals.
-
-% PSK is a popular modulation type for data transmission\cite{Meyer2011}. With a bipolar binary signal, the amplitude remains constant and only the phase will be changed with phase jumps of 180 degrees, which can be seen as a multiplication of the carrier signal with $\pm$ 1. That is alow known as binary phase shift keying.
+Phase shift keying (PSK) is another popular family of modulation schemes for digital signals, that is however simpler than QAM. In PSK as the name suggests only the phase of the envelope changes, which means that the symbols have all the same amplitude. Thus, instead of arranging the symbols into a grid as done in QAM, \(M\)-PSK distributes the symbols over the unit circle at equidistant intervals of \(2\pi / M\) radians \cite{Mathis,Kneubuehler}. An example of 8-PSK is shown in \figref{fig:psk-constellation}. Mathematically the process of a PSK modulation can be described by \skelpar[2]
+\begin{equation}
+ \skelpar[1]
+\end{equation}
+\skelpar[3]
% \begin{figure}
% % TODO: Better Image
@@ -140,10 +141,6 @@ Phase shift keying is another popular family of modulation schemes for digital s
% \includegraphics[width=5cm]{./image/BPSK2.png}
% \end{figure}
-% Two bits are modulated at ones with the same bandwidth as a 2-PSK so more informations are transmitted at the same time. \cite{Meyer2011}
-%TODO: Image Signal Raum
-% Most times there is noise and the points on the constellation diagram become a surface. If the surfaces overlap there will be a problem with decoding.
-
\subsection{Quadrature PSK (QPSK)}
\skelpar[2]{QPSK = 4-PSK = 4-QAM}
@@ -196,7 +193,7 @@ obtaining a new function
\begin{equation} \label{eqn:multipath-impulse-response}
h(\tau, t) = \sum_k c_k(t) \delta(\tau - \tau_k(t)),
\end{equation}
-that describes the \emph{channel impulse response} (CIR). This function depends on two time parameters: actual time \(t\) and convolution time \(\tau\). To better understand \(h(\tau, t)\), consider an example shown in figure \ref{fig:multipath-impulse-response}. Each stem represents a weighted Dirac delta, so each series of stems of the same color, along the convolution time \(\tau\) axis, is a channel response at some specific time \(t\). Along the other \(t\) axis we see how the entire channel response changes over time\footnote{In the figure only a finite number of stems was drawn, but actually the weights \(c_k(t)\) of the Dirac deltas change continuously.}. Notice that the stems are not quite aligned to the \(\tau\) time raster (dotted lines), that is because in \eqref{eqn:multipath-impulse-response} not only the weights \(c_k\) but also the delays \(\tau_k\) are time dependent.
+that describes the \emph{channel impulse response} (CIR). This function depends on two time parameters: actual time \(t\) and convolution time \(\tau\). To better understand \(h(\tau, t)\), consider an example shown in figure \ref{fig:multipath-impulse-response}. Each stem represents a weighted Dirac delta, so each series of stems of the same color, along the convolution time \(\tau\) axis, is a channel response at some specific time \(t\). Along the other axis we see how the entire channel response changes over time\footnote{In the figure only a finite number of stems was drawn, but actually the weights \(c_k(t)\) of the Dirac deltas change continuously.}. Notice that the stems are not quite aligned to the \(\tau\) time raster (dotted lines), that is because in \eqref{eqn:multipath-impulse-response} not only the weights \(c_k\) but also the delays \(\tau_k\) are time dependent.
\subsection{Spectrum of a multipath fading channel}
@@ -229,19 +226,17 @@ An intuitive parameter to quantify how dispersive channel is, is to take the tim
\begin{equation}
T_d = \max_{k} (\tau_k(t)) - \min_{k} (\tau_k(t)),
\end{equation}
-as is done in \cite{Gallager}. However since in reality some paths get more attenuated than others (\(c_k(t)\) parameters) it also not uncommon to define the delay spread as a weighted mean or even as a statistical second moment (RMS value), where mean tap power \(\expectation\{|c_k(t)|^2\}\) is taken into account \cite{Mathis,Messier}. More sophisticated definitions of delay spread will be briefly mentioned later in section \ref{sec:statistical-model}.
-
-Another important parameter for quantifying dispersion is \emph{coherence bandwidth}, a measure how
-\skelpar{sentence}
-
-% TODO: End the sentence
+as is done in \cite{Gallager}. However since in reality some paths get more attenuated than others (\(c_k(t)\) parameters) it also not uncommon to define the delay spread as a weighted mean or even as a statistical second moment (RMS value), where mean tap power \(\expectation\{|c_k(t)|^2\}\) is taken into account \cite{Mathis,Messier}. % More sophisticated definitions of delay spread will be briefly mentioned later in section \ref{sec:statistical-model}.
-\subsection{Effects of multipath fading on modulation constellations}
+Another important parameter for quantifying dispersion is \emph{coherence bandwidth}, a measure that is highly related to delay spread but in the frequency domain. % Coherence bandwidth can be be defined as
+\skelpar[3]
-% TODO : Can we sai it that way /dose it need to be in the implementation Part?
-
-It is to mention that not every constellation of parameter for a fading illustration leads to a satisfying plot constellation.
-For example in a Discrete-time Model: the same delay as the samples per Symbol or a multiple of it leads to a special case, where we see the constellation are around the modulate signal points, when there is no line of side path. This is because of \skelpar{Beschreiben warnn die Werte hübsch sind}
+% \subsection{Effects of multipath fading on modulation constellations}
+%
+% % TODO : Can we sai it that way /dose it need to be in the implementation Part?
+%
+% It is to mention that not every constellation of parameter for a fading illustration leads to a satisfying plot constellation.
+% For example in a Discrete-time Model: the same delay as the samples per Symbol or a multiple of it leads to a special case, where we see the constellation are around the modulate signal points, when there is no line of side path. This is because of \skelpar{Beschreiben warnn die Werte hübsch sind}
\subsection{Discrete-time model} \label{sec:discrete-time-model}
@@ -287,16 +282,19 @@ From a signal processing perspective \eqref{eqn:discrete-multipath-impulse-respo
\begin{figure}
\centering
- \begin{subfigure}{.45\linewidth}
+ \begin{subfigure}{.4\linewidth}
\includegraphics[width=\linewidth]{./figures/screenshots/Fractional_delay_6}
- \caption{Pulse with an integer delay of 6 samples.}
+ \caption{Integer delay of 6 samples.}
\end{subfigure}
\hskip 5mm
- \begin{subfigure}{.45\linewidth}
+ \begin{subfigure}{.4\linewidth}
\includegraphics[width=\linewidth]{./figures/screenshots/Fractional_delay_637}
- \caption{Pulse with a fractional delay of 6.37 samples.}
+ \caption{Fractional delay of 6.37 samples.}
\end{subfigure}
- \caption{\label{fig:fractional-delay-sinc-plot}}
+ \caption{
+ FIR filters for integer and fractional delays.
+ \label{fig:fractional-delay-sinc-plot}
+ }
\end{figure}
As mentioned in \ref{sec:discrete-time-model} a FIR filter can be used to simulate discrete-time models of multipath fading. But with FIR filters the delays can only be integer multiples of the sample rate. When the delays are non integer an approximation needs to be done, that is because FIR filters have a transfer function of the form
@@ -326,13 +324,15 @@ for a minimal error in the approximation. It is worth mentioning that it is also
Because as mentioned earlier it is difficult to estimate the time-dependent parameters of \(h_l(m)\) in many cases it is easier to model the components of the CIR as stochastic processes, thus greatly reducing the number of parameters \cite{Messier,Mathis}. This is especially effective for channels that are constantly changing, because by the central limit theorem the cumulative effect of many small changes tends to a normal distribution.
-\skelpar[3]{Assumptions of the model}
+% \skelpar[3]{Assumptions of the model}
+Before discussing the models themselves, their underlying statistical assumptions need to be considered. In the literature the so called WSSUS assumptions are made, which for a discrete time CIR \(h_l(m)\) can be formulated as
\begin{subequations}
\begin{align}
- R_{l} (k) &= \E{h_l(m) h_l^*(m+k)}, \\
- 0 &= \E{h_l(m) h_k^*(m)} \text { for } l \neq k
+ R_{l} (k) &= \E{h_l(m) h_l^*(m+k)}, \text{ and } \label{eqn:stat-wss} \\
+ 0 &= \E{h_l(m) h_k^*(m)} \text { for } l \neq k. \label{eqn:stat-us}
\end{align}
\end{subequations}
+Equation \eqref{eqn:stat-wss} states that the fading CIR is a \emph{wide sense stationary} stochastic process, while \eqref{eqn:stat-us} is the \emph{uncorrelated scattering} assumption, which says that the path do not interfere with each other. The latter is more realistic than the former, but WSS is still useful as it considerably simplifies the mathematical formulation \cite{Messier}.
\paragraph{NLOS case}