1 files changed, 39 insertions, 0 deletions
diff --git a/hal/confbits.hpp b/hal/confbits.hpp
new file mode 100644
index 0000000..9af7023
--- /dev/null
+++ b/hal/confbits.hpp
@@ -0,0 +1,39 @@
+#ifndef CONFBITS_HPP
+#define CONFBITS_HPP
+
+// DEVCFG3
+#pragma config FSRSSEL = PRIORITY_7    // Shadow Register Set Priority Select->SRS Priority 7
+#pragma config PMDL1WAY = ON    // Peripheral Module Disable Configuration->Allow only one reconfiguration
+#pragma config IOL1WAY = ON    // Peripheral Pin Select Configuration->Allow only one reconfiguration
+#pragma config FUSBIDIO = ON    // USB USID Selection->Controlled by the USB Module
+#pragma config FVBUSONIO = ON    // USB VBUS ON Selection->Controlled by USB Module
+
+// DEVCFG2
+#pragma config FPLLIDIV = DIV_12    // PLL Input Divider->12x Divider
+#pragma config FPLLMUL = MUL_24    // PLL Multiplier->24x Multiplier
+#pragma config UPLLIDIV = DIV_12    // USB PLL Input Divider->12x Divider
+#pragma config UPLLEN = OFF    // USB PLL Enable->Disabled and Bypassed
+#pragma config FPLLODIV = DIV_256    // System PLL Output Clock Divider->PLL Divide by 256
+
+// DEVCFG1
+#pragma config FNOSC = FRCDIV    // Oscillator Selection Bits->Fast RC Osc w/Div-by-N (FRCDIV)
+#pragma config FSOSCEN = ON    // Secondary Oscillator Enable->Enabled
+#pragma config IESO = ON    // Internal/External Switch Over->Enabled
+#pragma config POSCMOD = OFF    // Primary Oscillator Configuration->Primary osc disabled
+#pragma config OSCIOFNC = OFF    // CLKO Output Signal Active on the OSCO Pin->Disabled
+#pragma config FPBDIV = DIV_8    // Peripheral Clock Divisor->Pb_Clk is Sys_Clk/8
+#pragma config FCKSM = CSDCMD    // Clock Switching and Monitor Selection->Clock Switch Disable, FSCM Disabled
+#pragma config WDTPS = PS1048576    // Watchdog Timer Postscaler->1:1048576
+#pragma config WINDIS = OFF    // Watchdog Timer Window Enable->Watchdog Timer is in Non-Window Mode
+#pragma config FWDTEN = OFF    // Watchdog Timer Enable->WDT Disabled (SWDTEN Bit Controls)
+#pragma config FWDTWINSZ = WINSZ_25    // Watchdog Timer Window Size->Window Size is 25%
+
+// DEVCFG0
+#pragma config DEBUG = OFF    // Background Debugger Enable->Debugger is Disabled
+#pragma config JTAGEN = ON    // JTAG Enable->JTAG Port Enabled
+#pragma config ICESEL = ICS_PGx1    // ICE/ICD Comm Channel Select->Communicate on PGEC1/PGED1
+#pragma config PWP = OFF    // Program Flash Write Protect->Disable
+#pragma config BWP = OFF    // Boot Flash Write Protect bit->Protection Disabled
+#pragma config CP = OFF    // Code Protect->Protection Disabled
+
+#endif
+\ No newline at end of file