blob: 222abda8c63e71c1469ab4d580f6e024bdcd17c3 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
|
/*
* File: confbits.cpp
* Author: naopross
*/
#ifndef CONFBITS_HPP
#define CONFBITS_HPP
// DEVCFG3
#pragma config FSRSSEL = PRIORITY_7 // Shadow Register Set Priority Select->SRS Priority 7
#pragma config PMDL1WAY = ON // Peripheral Module Disable Configuration->Allow only one reconfiguration
#pragma config IOL1WAY = ON // Peripheral Pin Select Configuration->Allow only one reconfiguration
#pragma config FUSBIDIO = ON // USB USID Selection->Controlled by the USB Module
#pragma config FVBUSONIO = ON // USB VBUS ON Selection->Controlled by USB Module
// DEVCFG2
#pragma config FPLLIDIV = DIV_12 // PLL Input Divider->12x Divider
#pragma config FPLLMUL = MUL_24 // PLL Multiplier->24x Multiplier
#pragma config UPLLIDIV = DIV_12 // USB PLL Input Divider->12x Divider
#pragma config UPLLEN = OFF // USB PLL Enable->Disabled and Bypassed
#pragma config FPLLODIV = DIV_256 // System PLL Output Clock Divider->PLL Divide by 256
// DEVCFG1
#pragma config FNOSC = FRCDIV // Oscillator Selection Bits->Fast RC Osc w/Div-by-N (FRCDIV)
#pragma config FSOSCEN = ON // Secondary Oscillator Enable->Enabled
#pragma config IESO = ON // Internal/External Switch Over->Enabled
#pragma config POSCMOD = OFF // Primary Oscillator Configuration->Primary osc disabled
#pragma config OSCIOFNC = OFF // CLKO Output Signal Active on the OSCO Pin->Disabled
#pragma config FPBDIV = DIV_8 // Peripheral Clock Divisor->Pb_Clk is Sys_Clk/8
#pragma config FCKSM = CSDCMD // Clock Switching and Monitor Selection->Clock Switch Disable, FSCM Disabled
#pragma config WDTPS = PS1048576 // Watchdog Timer Postscaler->1:1048576
#pragma config WINDIS = OFF // Watchdog Timer Window Enable->Watchdog Timer is in Non-Window Mode
#pragma config FWDTEN = OFF // Watchdog Timer Enable->WDT Disabled (SWDTEN Bit Controls)
#pragma config FWDTWINSZ = WINSZ_25 // Watchdog Timer Window Size->Window Size is 25%
// DEVCFG0
#pragma config DEBUG = OFF // Background Debugger Enable->Debugger is Disabled
#pragma config JTAGEN = ON // JTAG Enable->JTAG Port Enabled
#pragma config ICESEL = ICS_PGx1 // ICE/ICD Comm Channel Select->Communicate on PGEC1/PGED1
#pragma config PWP = OFF // Program Flash Write Protect->Disable
#pragma config BWP = OFF // Boot Flash Write Protect bit->Protection Disabled
#pragma config CP = OFF // Code Protect->Protection Disabled
#endif
|
