diff options
| author | Nao Pross <naopross@thearcway.org> | 2018-10-30 11:41:24 +0100 |
|---|---|---|
| committer | Nao Pross <naopross@thearcway.org> | 2018-10-30 11:41:24 +0100 |
| commit | 43be150dc6e84f6f6eeb071cd3cdb7fc21125d60 (patch) | |
| tree | 541fd3d690c1bdfd7b68d684029a400b80f4aa06 /sw-old/cpld/address_decoder.vcl | |
| parent | Add datasheets for ATmega328 and 74LS259 (diff) | |
| download | z80uPC-43be150dc6e84f6f6eeb071cd3cdb7fc21125d60.tar.gz z80uPC-43be150dc6e84f6f6eeb071cd3cdb7fc21125d60.zip | |
Move sw to sw-old and hw to hw-altium, add kicad files
Diffstat (limited to 'sw-old/cpld/address_decoder.vcl')
| -rwxr-xr-x | sw-old/cpld/address_decoder.vcl | 136 |
1 files changed, 136 insertions, 0 deletions
diff --git a/sw-old/cpld/address_decoder.vcl b/sw-old/cpld/address_decoder.vcl new file mode 100755 index 0000000..6befbd2 --- /dev/null +++ b/sw-old/cpld/address_decoder.vcl @@ -0,0 +1,136 @@ +[DEVICE]
+
+Family = M4;
+PartType = M4-32/32;
+Package = 44PLCC;
+PartNumber = M4-32/32-15JC;
+Speed = -15;
+Operating_condition = COM;
+EN_Segment = NO;
+Pin_MC_1to1 = NO;
+Voltage = 5.0;
+
+[REVISION]
+
+RCS = "$Revision: 1.24 $";
+Parent = m4.vci;
+SDS_file = m4.sds;
+Design = address_decoder.tt4;
+Rev = 0.01;
+DATE = 11/23/17;
+TIME = 11:55:45;
+Type = TT2;
+Pre_Fit_Time = 1;
+Source_Format = ABEL_Schematic;
+
+[IGNORE ASSIGNMENTS]
+
+Pin_Assignments = NO;
+Pin_Keep_Block = NO;
+Pin_Keep_Segment = NO;
+Group_Assignments = NO;
+Macrocell_Assignments = NO;
+Macrocell_Keep_Block = NO;
+Macrocell_Keep_Segment = NO;
+Pin_Reservation = NO;
+Timing_Constraints = NO;
+Block_Reservation = NO;
+Segment_Reservation = NO;
+Ignore_Source_Location = NO;
+Ignore_Source_Optimization = NO;
+Ignore_Source_Timing = NO;
+
+[CLEAR ASSIGNMENTS]
+
+Pin_Assignments = NO;
+Pin_Keep_Block = NO;
+Pin_Keep_Segment = NO;
+Group_Assignments = NO;
+Macrocell_Assignments = NO;
+Macrocell_Keep_Block = NO;
+Macrocell_Keep_Segment = NO;
+Pin_Reservation = NO;
+Timing_Constraints = NO;
+Block_Reservation = NO;
+Segment_Reservation = NO;
+Ignore_Source_Location = NO;
+Ignore_Source_Optimization = NO;
+Ignore_Source_Timing = NO;
+
+[BACKANNOTATE NETLIST]
+
+Netlist = VHDL;
+Delay_File = SDF;
+Generic_VCC = ;
+Generic_GND = ;
+
+[BACKANNOTATE ASSIGNMENTS]
+
+Pin_Assignment = NO;
+Pin_Block = NO;
+Pin_Macrocell_Block = NO;
+Routing = NO;
+
+[GLOBAL PROJECT OPTIMIZATION]
+
+Balanced_Partitioning = YES;
+Spread_Placement = YES;
+Max_Pin_Percent = 100;
+Max_Macrocell_Percent = 100;
+Max_Inter_Seg_Percent = 100;
+Max_Seg_In_Percent = 100;
+Max_Blk_In_Percent = 100;
+
+[FITTER REPORT FORMAT]
+
+Fitter_Options = YES;
+Pinout_Diagram = NO;
+Pinout_Listing = YES;
+Detailed_Block_Segment_Summary = YES;
+Input_Signal_List = YES;
+Output_Signal_List = YES;
+Bidir_Signal_List = YES;
+Node_Signal_List = YES;
+Signal_Fanout_List = YES;
+Block_Segment_Fanin_List = YES;
+Prefit_Eqn = YES;
+Postfit_Eqn = YES;
+Page_Break = YES;
+
+[OPTIMIZATION OPTIONS]
+
+Logic_Reduction = YES;
+Max_PTerm_Split = 16;
+Max_PTerm_Collapse = 16;
+XOR_Synthesis = YES;
+Node_Collapse = Yes;
+DT_Synthesis = Yes;
+
+[FITTER GLOBAL OPTIONS]
+
+Run_Time = 0;
+Set_Reset_Dont_Care = NO;
+In_Reg_Optimize = YES;
+Clock_Optimize = NO;
+Conf_Unused_IOs = OUT_LOW;
+
+[POWER]
+
+[HARDWARE DEVICE OPTIONS]
+
+[PIN RESERVATIONS]
+layer = OFF;
+
+[LOCATION ASSIGNMENT]
+
+Layer = OFF
+MMU_OUT_12_ = OUTPUT,39,1,-;
+MMU_OUT_13_ = OUTPUT,38,1,-;
+MMU_OUT_14_ = OUTPUT,37,1,-;
+MMU_OUT_15_ = OUTPUT,36,1,-;
+CSPIO = OUTPUT,29,1,-;
+CSCTC = OUTPUT,28,1,-;
+CSUART = OUTPUT,27,1,-;
+CSRAM = OUTPUT,26,1,-;
+CSROMH = OUTPUT,25,1,-;
+CSROML = OUTPUT,24,1,-;
|