summaryrefslogtreecommitdiffstats
path: root/sw-old/cpld/address_decoder.rpt
diff options
context:
space:
mode:
Diffstat (limited to 'sw-old/cpld/address_decoder.rpt')
-rwxr-xr-xsw-old/cpld/address_decoder.rpt452
1 files changed, 452 insertions, 0 deletions
diff --git a/sw-old/cpld/address_decoder.rpt b/sw-old/cpld/address_decoder.rpt
new file mode 100755
index 0000000..ecad5be
--- /dev/null
+++ b/sw-old/cpld/address_decoder.rpt
@@ -0,0 +1,452 @@
+|--------------------------------------------|
+|- ispDesignExpert Fitter Report File -|
+|- Version 8.3.02.12_DE_HDL_BASE -|
+|- (c)Copyright, Lattice Semiconductor 1999 -|
+|--------------------------------------------|
+
+
+
+
+Project_Summary
+~~~~~~~~~~~~~~~
+
+Project Name : address_decoder
+Project Path : C:\_prossn\cpld.nao
+Project Fitted on : Thu Nov 23 11:55:45 2017
+
+Device : M4-32/32
+Package : 44PLCC
+Speed : -15
+Partnumber : M4-32/32-15JC
+Source Format : ABEL_Schematic
+
+
+// Project 'address_decoder' was Fitted Successfully! //
+
+
+Compilation_Times
+~~~~~~~~~~~~~~~~~
+Reading/DRC 0 sec
+Partition 0 sec
+Place 0 sec
+Route 0 sec
+Jedec/Report generation 0 sec
+ --------
+Fitter 00:00:00
+
+
+Design_Summary
+~~~~~~~~~~~~~~
+ Total Input Pins : 11
+ Total Output Pins : 10
+ Total Bidir I/O Pins : 0
+ Total Flip-Flops : 0
+ Total Product Terms : 10
+ Total Reserved Pins : 0
+ Total Reserved Blocks : 0
+
+
+Device_Resource_Summary
+~~~~~~~~~~~~~~~~~~~~~~~
+ Total
+ Available Used Available Utilization
+Dedicated Pins
+ Input-Only Pins .. .. .. --> ..
+ Clock/Input Pins 2 0 2 --> 0%
+I/O Pins 32 21 11 --> 65%
+Logic Macrocells 32 10 22 --> 31%
+ Unusable Macrocells .. 0 ..
+
+CSM Outputs/Total Block Inputs 66 11 55 --> 16%
+Logical Product Terms 160 10 150 --> 6%
+Product Term Clusters 32 0 32 --> 0%
+
+
+Blocks_Resource_Summary
+~~~~~~~~~~~~~~~~~~~~~~~
+ # of PT
+ I/O Macrocells Macrocells logic clusters
+ Fanin Pins Used Unusable available PTs available Pwr
+---------------------------------------------------------------------------------
+Maximum 33 16 -- -- 16 80 16 -
+---------------------------------------------------------------------------------
+Block A 0 10 0 0 16 0 16 Hi
+Block B 11 11 10 0 6 10 16 Hi
+---------------------------------------------------------------------------------
+
+<Note> Four rightmost columns above reflect last status of the placement process.
+<Note> Pwr (Power) : Hi = High
+ Lo = Low.
+
+
+Optimizer_and_Fitter_Options
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+Pin Assignment : Yes
+Group Assignment : No
+Pin Reservation : No (1)
+Block Reservation : No
+
+@Ignore_Project_Constraints :
+ Pin Assignments : No
+ Keep Block Assignment --
+ Keep Segment Assignment --
+ Group Assignments : No
+ Macrocell Assignment : No
+ Keep Block Assignment --
+ Keep Segment Assignment --
+
+@Backannotate_Project_Constraints
+ Pin Assignments : No
+ Pin And Block Assignments : No
+ Pin, Macrocell and Block : No
+
+@Timing_Constraints : No
+
+@Global_Project_Optimization :
+ Balanced Partitioning : Yes
+ Spread Placement : Yes
+
+ Note :
+ Pack Design :
+ Balanced Partitioning = No
+ Spread Placement = No
+ Spread Design :
+ Balanced Partitioning = Yes
+ Spread Placement = Yes
+
+@Logic_Synthesis :
+ Logic Reduction : Yes
+ Node Collapsing : Yes
+ D/T Synthesis : Yes
+ Clock Optimization : No
+ Input Register Optimization : Yes
+ XOR Synthesis : Yes
+ Max. P-Term for Collapsing : 16
+ Max. P-Term for Splitting : 16
+ Max. Equation Fanin : 32
+ Keep Xor : Yes
+
+@Utilization_options
+ Max. % of macrocells used : 100
+ Max. % of block inputs used : 100
+ Max. % of segment lines used : ---
+ Max. % of macrocells used : ---
+
+
+@Import_Source_Constraint_Option No
+
+@Zero_Hold_Time No
+
+@Pull_up No
+
+@User_Signature 0
+
+@Output_Slew_Rate Default = Fast(2)
+
+@Power Default = High(2)
+
+
+Device Options:
+<Note> 1 : Reserved unused I/Os can be independently driven to Low or High, and does not
+ follow the drive level set for the Global Configure Unused I/O Option.
+<Note> 2 : For user-specified constraints on individual signals, refer to the Output,
+ Bidir and Burried Signal Lists.
+
+
+
+
+Pinout_Listing
+~~~~~~~~~~~~~~
+ | Pin |Blk |Assigned|
+Pin No| Type |Pad |Pin | Signal name
+---------------------------------------------------------------
+ 1 | GND | | |
+ 2 | I_O | A7 | * |MMU_IN_7_
+3 | I_O | A6 | * |MMU_IN_6_
+4 | I_O | A5 | * |MMU_IN_5_
+5 | I_O | A4 | * |MMU_IN_4_
+6 | I_O | A3 | * |MMU_IN_3_
+7 | I_O | A2 | * |MMU_IN_2_
+8 | I_O | A1 | |
+9 | I_O | A0 | |
+10 | JTAG | | |
+11 | CkIn | | |
+12 | GND | | |
+13 | JTAG | | |
+14 | I_O | A8 | |
+15 | I_O | A9 | |
+16 | I_O | A10| |
+17 | I_O | A11| |
+18 | I_O | A12| * |MMU_IN_12_
+19 | I_O | A13| * |MMU_IN_13_
+20 | I_O | A14| * |MMU_IN_14_
+21 | I_O | A15| * |MMU_IN_15_
+22 | Vcc | | |
+23 | GND | | |
+24 | I_O | B15| * |CSROML
+25 | I_O | B14| * |CSROMH
+26 | I_O | B13| * |CSRAM
+27 | I_O | B12| * |CSUART
+28 | I_O | B11| * |CSCTC
+29 | I_O | B10| * |CSPIO
+30 | I_O | B9 | * |IORQ
+31 | I_O | B8 | |
+32 | JTAG | | |
+33 | CkIn | | |
+34 | GND | | |
+35 | JTAG | | |
+36 | I_O | B0 | * |MMU_OUT_15_
+37 | I_O | B1 | * |MMU_OUT_14_
+38 | I_O | B2 | * |MMU_OUT_13_
+39 | I_O | B3 | * |MMU_OUT_12_
+40 | I_O | B4 | |
+41 | I_O | B5 | |
+42 | I_O | B6 | |
+43 | I_O | B7 | |
+44 | Vcc | | |
+
+---------------------------------------------------------------------------
+
+<Note> Blk Pad : This notation refers to the Block I/O pad number in the device.
+<Note> Assigned Pin : user or dedicated input assignment (E.g. Clock pins).
+<Note> Pin Type :
+ CkIn : Dedicated input or clock pin
+ CLK : Dedicated clock pin
+ INP : Dedicated input pin
+ JTAG : JTAG Control and test pin
+ NC : No connected
+
+
+
+Input_Signal_List
+~~~~~~~~~~~~~~~~~
+ P R
+ Pin r e O Input
+Pin Blk PTs Type e s E Fanout Pwr Slew Signal
+----------------------------------------------------------------------
+ 30 B . I/O -B Hi Fast IORQ
+ 18 A . I/O -B Hi Fast MMU_IN_12_
+ 19 A . I/O -B Hi Fast MMU_IN_13_
+ 20 A . I/O -B Hi Fast MMU_IN_14_
+ 21 A . I/O -B Hi Fast MMU_IN_15_
+ 7 A . I/O -B Hi Fast MMU_IN_2_
+ 6 A . I/O -B Hi Fast MMU_IN_3_
+ 5 A . I/O -B Hi Fast MMU_IN_4_
+ 4 A . I/O -B Hi Fast MMU_IN_5_
+ 3 A . I/O -B Hi Fast MMU_IN_6_
+ 2 A . I/O -B Hi Fast MMU_IN_7_
+----------------------------------------------------------------------
+
+<Note> Power : Hi = High
+ MH = Medium High
+ ML = Medium Low
+ Lo = Low
+
+
+
+Output_Signal_List
+~~~~~~~~~~~~~~~~~~
+ P R
+ Pin r e O Output
+Pin Blk PTs Type e s E Fanout Pwr Slew Signal
+----------------------------------------------------------------------
+ 28 B 1 COM -- Hi Fast CSCTC
+ 29 B 1 COM -- Hi Fast CSPIO
+ 26 B 1 COM -- Hi Fast CSRAM
+ 25 B 1 COM -- Hi Fast CSROMH
+ 24 B 1 COM -- Hi Fast CSROML
+ 27 B 1 COM -- Hi Fast CSUART
+ 39 B 1 COM -- Hi Fast MMU_OUT_12_
+ 38 B 1 COM -- Hi Fast MMU_OUT_13_
+ 37 B 1 COM -- Hi Fast MMU_OUT_14_
+ 36 B 1 COM -- Hi Fast MMU_OUT_15_
+----------------------------------------------------------------------
+
+<Note> Power : Hi = High
+ MH = Medium High
+ ML = Medium Low
+ Lo = Low
+
+
+
+Bidir_Signal_List
+~~~~~~~~~~~~~~~~~
+ P R
+ Pin r e O Bidir
+Pin Blk PTs Type e s E Fanout Pwr Slew Signal
+----------------------------------------------------------------------
+----------------------------------------------------------------------
+
+<Note> Power : Hi = High
+ MH = Medium High
+ ML = Medium Low
+ Lo = Low
+
+
+
+Buried_Signal_List
+~~~~~~~~~~~~~~~~~~
+ P R
+ Pin r e O Node
+#Mc Blk PTs Type e s E Fanout Pwr Slew Signal
+----------------------------------------------------------------------
+----------------------------------------------------------------------
+
+<Note> Power : Hi = High
+ MH = Medium High
+ ML = Medium Low
+ Lo = Low
+
+
+
+
+Signals_Fanout_List
+~~~~~~~~~~~~~~~~~~~
+Signal Source : Fanout List
+-----------------------------------------------------------------------------
+ MMU_IN_7_{ B}: CSPIO{ B}
+ MMU_IN_6_{ B}: CSPIO{ B}
+ MMU_IN_15_{ B}: MMU_OUT_15_{ B} CSROML{ B} CSROMH{ B}
+ : CSRAM{ B}
+ MMU_IN_5_{ B}: CSPIO{ B}
+ MMU_IN_4_{ B}: CSPIO{ B}
+ MMU_IN_3_{ B}: CSPIO{ B}
+ IORQ{ C}: CSPIO{ B}
+ MMU_IN_2_{ B}: CSPIO{ B}
+ MMU_IN_14_{ B}: CSROML{ B} CSROMH{ B} MMU_OUT_14_{ B}
+ MMU_IN_13_{ B}: CSROML{ B} CSROMH{ B} MMU_OUT_13_{ B}
+ MMU_IN_12_{ B}: MMU_OUT_12_{ B}
+-----------------------------------------------------------------------------
+
+<Note> {.} : Indicates block location of signal
+
+
+Set_Reset_Summary
+~~~~~~~~~~~~~~~~~
+
+Block A
+block level set pt :
+block level reset pt :
+Equations :
+| | |Block|Block| Signal
+| Reg |Mode |Set |Reset| Name
++-----+-----+-----+-----+------------------------
+| | | | | MMU_IN_15_
+| | | | | MMU_IN_14_
+| | | | | MMU_IN_13_
+| | | | | MMU_IN_12_
+| | | | | MMU_IN_2_
+| | | | | MMU_IN_3_
+| | | | | MMU_IN_4_
+| | | | | MMU_IN_5_
+| | | | | MMU_IN_6_
+| | | | | MMU_IN_7_
+
+
+Block B
+block level set pt :
+block level reset pt :
+Equations :
+| | |Block|Block| Signal
+| Reg |Mode |Set |Reset| Name
++-----+-----+-----+-----+------------------------
+| | | | | MMU_OUT_12_
+| | | | | MMU_OUT_13_
+| | | | | MMU_OUT_14_
+| | | | | MMU_OUT_15_
+| | | | | CSPIO
+| | | | | CSCTC
+| | | | | CSUART
+| | | | | CSRAM
+| | | | | CSROMH
+| | | | | CSROML
+| | | | | IORQ
+
+
+<Note> (S) means the macrocell is configured in synchronous mode
+ i.e. it uses the block-level set and reset pt.
+ (A) means the macrocell is configured in asynchronous mode
+ i.e. it can have its independant set or reset pt.
+ (BS) means the block-level set pt is selected.
+ (BR) means the block-level reset pt is selected.
+
+
+
+
+BLOCK_B_LOGIC_ARRAY_FANIN
+~~~~~~~~~~~~~~~~~~~~~~~~~
+CSM Signal Source CSM Signal Source
+------------------------------------ ------------------------------------
+mx B0 MMU_IN_7_ pin 2 mx B17 ... ...
+mx B1 MMU_IN_4_ pin 5 mx B18 MMU_IN_2_ pin 7
+mx B2 ... ... mx B19 ... ...
+mx B3 ... ... mx B20 ... ...
+mx B4 ... ... mx B21 ... ...
+mx B5 ... ... mx B22 ... ...
+mx B6 MMU_IN_6_ pin 3 mx B23 ... ...
+mx B7 MMU_IN_3_ pin 6 mx B24 ... ...
+mx B8 MMU_IN_15_ pin 21 mx B25 ... ...
+mx B9 MMU_IN_5_ pin 4 mx B26 ... ...
+mx B10 MMU_IN_12_ pin 18 mx B27 ... ...
+mx B11 ... ... mx B28 ... ...
+mx B12 MMU_IN_13_ pin 19 mx B29 ... ...
+mx B13 IORQ pin 30 mx B30 ... ...
+mx B14 ... ... mx B31 ... ...
+mx B15 MMU_IN_14_ pin 20 mx B32 ... ...
+mx B16 ... ...
+----------------------------------------------------------------------------
+
+<Note> CSM indicates the mux inputs from the Central Switch Matrix.
+<Note> Source indicates where the signal comes from (pin or macrocell).
+
+
+
+
+PostFit_Equations
+~~~~~~~~~~~~~~~~~
+
+
+ P-Terms Fan-in Fan-out Type Name (attributes)
+--------- ------ ------- ---- -----------------
+ 1 1 1 Pin MMU_OUT_15_
+ 1 3 1 Pin CSROML-
+ 1 3 1 Pin CSROMH-
+ 1 1 1 Pin MMU_OUT_14_
+ 1 1 1 Pin CSRAM
+ 1 1 1 Pin MMU_OUT_13_
+ 0 0 1 Pin CSUART
+ 1 1 1 Pin MMU_OUT_12_
+ 0 0 1 Pin CSCTC
+ 1 7 1 Pin CSPIO-
+=========
+ 8 P-Term Total: 8
+ Total Pins: 21
+ Total Nodes: 0
+ Average P-Term/Output: 0
+
+
+Equations:
+
+MMU_OUT_15_ = (MMU_IN_15_);
+
+!CSROML = (!MMU_IN_15_ & !MMU_IN_14_ & !MMU_IN_13_);
+
+!CSROMH = (!MMU_IN_15_ & !MMU_IN_14_ & MMU_IN_13_);
+
+MMU_OUT_14_ = (MMU_IN_14_);
+
+CSRAM = (!MMU_IN_15_);
+
+MMU_OUT_13_ = (MMU_IN_13_);
+
+CSUART = (0);
+
+MMU_OUT_12_ = (MMU_IN_12_);
+
+CSCTC = (0);
+
+!CSPIO = (!IORQ & !MMU_IN_7_ & !MMU_IN_6_ & !MMU_IN_5_ & MMU_IN_4_ & !MMU_IN_3_ & !MMU_IN_2_);
+
+
+Reverse-Polarity Equations:
+
generated by cgit v1.2.1 (git 2.18.0) at 2024-11-13 12:33:38 +0100