diff options
| -rw-r--r-- | DigME.tex | 73 | ||||
| -rw-r--r-- | build/DigME.pdf | bin | 213631 -> 119686 bytes |
2 files changed, 71 insertions, 2 deletions
@@ -32,6 +32,16 @@ timing/yunit = 4mm, } +\usepackage[ + european, americanports +]{circuitikz} + +\ctikzset{ + logic ports = ieee, + logic ports/scale = .7, + resistors/scale = .5, +} + %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% % Metadata @@ -95,7 +105,7 @@ Physical contraints include: I/O contraints, Netlist constraints, Placement cons \section{System level VHDL} \subsection{Aliases} -The goal is now to build re-usable IP blocks with VHDL. For that we need to refresh some important features of the lanugage. The first of which are aliases. +The goal is now to build re-usable intellectual property (IP) blocks with VHDL. For that we need to refresh some important features of the lanugage. The first of which are aliases. \begin{lstlisting}[language=vhdl] signal data_bus: std_logic_vector(31 downto 0); @@ -245,7 +255,7 @@ package body parity_helpers is -- functions function pargen(avect: std_ulogic_vector) return std_ulogic - is `\textrm{From listing \ref{lst:pargen}}` + is `\ldots \textrm{same as listing \ref{lst:pargen}} \ldots` end function pargen; -- instantiation of variables constant nibble : integer := 4; @@ -330,4 +340,63 @@ Conversion operators \vhdl{to_ufixed}, \vhdl{to_sfixed} are available. To get ba \item Rounding can be controlled by setting \vhdl{roud_style} to \vhdl{fixed_round} (default) or \vhdl{fixed_truncate}. \end{itemize} +\subsection{Block RAM} + + +\section{Intellectual Property (IP) Blocks} + +\section{Serial communication} + +\subsection{Classification} + +Serial communication protocols can be categorized by various criteria. From a network topology standpoint nodes can be connected as point to point (USART), star, bus (PCI), ring, mesh (IoT), fully connected, line, or tree . From a timing perspective a communication link can be either synchronos or asynchronous. The hardware interface can be serial or parallel. The communication can be On-Chip or Off-Chip. And finally, physically the electrical signal representing bits can be single ended, differential, voltage mode, or current mode. + +Of the well known Open System Interconnect (OSI) model, which is composed of seven layers (from top to bottom): application, presentation, session, transport, network (packet), data-link (frame), physical (bit stream), in this course we will only care about the bottom 2, namely data-link and physical. + +\subsection{Logic to physical signal conversion} +\begin{figure}[h] + \centering + \begin{circuitikz}[] + \draw (0,7) node[anchor = east, buffer port] (in) {} + to[short] ++(5mm,0) + to[TL, label=\(Z_0\)] ++(20mm,0) coordinate (X) + to[short] ++(5mm,0) node[anchor = west, buffer port] (out) {} + % + (X) to[R, label=\(R_\mathrm{f}\), label distance = 5pt, *-] + ++(0,3) node[tground, label=\(V_\mathrm{cco}\)] {} + ; + + \draw (0,0) node[anchor = east, buffer port] (in) {} + to[short] ++(5mm,0) coordinate (Y) + to[TL, label=\(Z_0\)] ++(20mm,0) coordinate (X) + to[short] ++(5mm,0) node[anchor = west, buffer port] (out) {} + % + (X) to[R, label=\(R_\mathrm{n}\), label distance = 5pt, *-] + ++(0,3) node[tground, label=\(V_\mathrm{cco}/2\)] {} + % + (Y) to[R, label=\(R_\mathrm{f}\), *-] + ++(0,3) node[tground, label=\(V_\mathrm{cco}/2\)] {} + ; + + \ctikzset{amplifiers/plus = {}, amplifiers/minus = {}} + \draw (-.7,-7) node[anchor = east, fd op amp, scale = .5] (in) {} + (in.out +) to[short] ++(1mm,5mm) to[R, label = \(R_s\)] ++(10mm,0) coordinate (Yu) + to[TL, label=\(Z_0\)] ++(20mm,0) coordinate (Xu) + % + (in.out -) to[short] ++(1mm,-5mm) to[R, label = \(R_s\)] ++(10mm,0) coordinate (Yd) + to[TL] ++(20mm,0) coordinate (Xd) + % + (in.east) ++(40mm,0) node[anchor = west, fd op amp, scale = .5] (out) {} + (Xd) to[short] ++(8mm,0) to[short] ++(1mm,5mm) (out.+) + (Xu) to[short] ++(8mm,0) to[short] ++(1mm,-5mm) (out.-) + % + (Yu) to[R, *-*, label = \(R_\mathrm{nd}\)] (Yd) + (Xu) to[R, *-*, label = \(R_\mathrm{fd}\)] (Xd) + ; + \end{circuitikz} + \caption{ + \label{fig:termination} + } +\end{figure} + \end{document} diff --git a/build/DigME.pdf b/build/DigME.pdf Binary files differindex 5192bc3..92d628a 100644 --- a/build/DigME.pdf +++ b/build/DigME.pdf |